User Manual

XScopes
User’s Manual
DS-XScopes-3.5 – December, 2014 Page | 15
2.3 Trigger Settings
The XScope has an advance triggering system, it has most of the trigger controls of a professional oscilloscope. Figure
24 shows the trigger menus.
Figure 24: Trigger menus
2.3.1 Trigger Types
There are four different trigger types, which determine when to display the trace on the screen:
 Normal: Trace only when the trigger event occurs.
 Single: Only one trace is displayed when the trigger event occurs.
 Auto: Trace when the trigger event occurs, or after a timeout.
 Free: Trace continuously ignoring the trigger.