Use and Care Guide

Product Data Sheet: GacoRoof Colorant
March 2014
Made in the USA  gaco.com  800.456.4226
GACOROOF COLORANT
DESCRIPTION:
GacoRoof Colorant is a liquid-silicone alternative to premixed GacoRoof Color.
USAGE:
Used as a tint base for GacoRoof White.
COLORS:
GT1621 Gray, GT1670 Mojave Tan
Note: Color will vary according to the amount of colorant added. If using as a top coat, ensure colors are
consistent between batches. Intermixing batches is highly recommended. Gaco Western assumes no
responsibility for color inconsistency.
LIMITATIONS:
Only use GacoRoof Colorant to tint GacoRoof White.
PACKAGED PRODUCT DATA
THEORETICAL
COVERAGE:
A maximum of one can of colorant is recommended per 5 gallons of GacoRoof White.
SOLIDS:
GT1621
Weight: 34% ± 1%
Volume: 27% ± 1%
GT1670
Weight: 64% ± 1%
Volume: 44% ± 1%
V.O.C:
GT1621
560 g/L
GT1670
432 g/L
FLASH POINT:
135°F (57°C)
STORAGE STABILITY:
Keep container closed and store in a cool dry place.
APPLICATION
MIXING:
Mix the colorant immediately before beginning the project. Shake colorant container thoroughly to
mix pigment.
APPLICATION:
Add GacoRoof Colorant to a 1 gallon or 5-gallon pail of GacoRoof White. Mix thoroughly with a
mechanical mixer, scrape the sides of the pail and then mix again.
CLEAN UP:
Application tools and equipment can be cleaned with GacoFlex Silicone Solvent or 100% Pure
Mineral Spirits. DO NOT USE WATER OR RECLAIMED SOLVENTS.
CAUTION:
For specific Health and Safety information please refer to the Material Safety Data Sheet.