Data Sheet

10/26/2015
APPLICABLE STANDARDS & PROTOCOLS
 UL 790, Class A
 Miami-Dade County Product Control Approved –
13-0419.04 (Available in Southeast; contact
Technical Services at 800.766.3411)
 Florida Building Code Approved FL10124-R12
 UL 997 modified to 110 mph
 ASTM D7158, Class H
 ASTM D3161, Class F
 ASTM D3018, Type 1
 ASTM D3462
 ICC ESR-1475, ESR-3267**
 Texas Department of Insurance
 ENERGY STAR
®
qualified (U.S. only; Arctic
White only)
Effective 7/1/08, existing NYC MEA's may be used but are no longer required.
**Obtained ESR 3267 evaluation from ICC Evaluation Services based on compliance with the requirements of AC438, an acceptance criteria
established by ICC Evaluation Services to evaluate asphalt shingles that contains performance tests in addition to those required by the building code.
(ICC Evaluation Services provides technical evaluations of building products that directly address the issue of code compliance. Building inspectors
use these evaluation reports to help determine code compliance and enforce building regulations.)
PRODUCT/SYSTEM SPECIFICS
†
 Fiberglass Asphalt Construction
 Dimensions (approx.): 13 1/4” x 39 3/8” (336.5 x 1001.1 mm)
 Exposure: 5 5/8” (142.88 mm)
 Bundles/Square: 3
 Pieces/Square: 64
 Nails/Square: 256 (384 where 6 nails per shingle is required)
††
 StainGuard
®
Protection: Yes (Location dependent; contact Technical Services at 800.766.3411)
 Hip/Ridge: Timbertex
®
; Seal-A-Ridge
®
; Z
®
Ridge; Ridglass
®
 Starter: ProStart™; WeatherBlocker™
†
Refer to complete published installation instructions.
††
Required by some local codes and required for enhanced wind coverage on certain products.
INSTALLATION
Detailed installation instructions are provided on the inside of each bundle wrapper of Timberline
®
Natural Shadow
®
Shingles. Installation instructions may also be obtained at www.gaf.com.