Product Brochure

1
Refer to UL Online Certifications Directory for actual assemblies.
SPECIFICATIONS
• UV-stabilized polypropylene construction resists UV degradation for up to 90 days
1
• For use with asphalt shingles
• Meets or exceeds the physical requirements of ASTM D226, D4869, and CSA A123-3
• Miami-Dade County Product Control and State of Florida approved
• Approx: 10 squares/roll – 1,000 sq. ft. (92.9 m
2
) (excludes laps); length 250’
(76.2 m); width 48" (1.22 m); 23 lb. (10.4 kg) / roll (nominal)
• Listed with Texas Department of Insurance as an acceptable
alternate roof underlayment
Roof Deck Protection
• Enhanced Walkability… Special spunbound surface helps
provide increased traction compared to typical asphalt felts
• Tough Synthetic Construction… Helps resists tearing and
will not absorb moisture, become brittle, or leach oils
• Easy to Work With… Super-lightweight, 10 square, 48"
(1.23 m) wide roll (vs. typical 36" [914 mm] wide felt rolls)
• Cooler to Work On… Medium-gray surface is cooler than
typical black asphalt felts and the leading black low-cost synthetic
underlayment
• Excellent Walkability… Specially designed surface
helps provide excellent walkability for installers compared
to conventional felts
• Moisture-Control Design… Helps remove nearly
twice as much damaging moisture from your roof deck
as the leading synthetic non-breathable underlayment
1
• Durable Construction… Non-asphaltic, polypropylene
construction will not rot or become brittle (unlike
conventional felts, which can disintegrate over time)
• Great Look… Unlike conventional asphaltic felts,
Tiger Paw
™
Roof Deck Protection resists wrinkling and
buckling that can “telegraph” through your roof shingles
and detract from its finished appearance
• Stronger… Synthetic, non-woven construction provides
at least 600% greater tear strength than standard #30 felt
2
Note: Always install FeltBuster
®
High-Traction Synthetic Roofing Felt using plastic cap nails or plastic cap
staples. Do NOT use nails or staples without caps.
1
Note: 90-day UV resistance refers to standardized testing conducted BY GAF to ensure the product will not physically
degrade when exposed to UV. It is NOT related to withstanding water, snow, or wind. While FeltBuster
®
High-Traction Synthetic Roofing Felt is water resistant, it is NOT WATERPROOF. DO NOT USE FeltBuster
®
High-Traction Synthetic Roofing Felt as a temporary roof to protect property or possessions.
Roof Deck Protection
SPECIFICATIONS
• UV-stabilized polypropylene construction resists UV degradation for up
to 180 days*
• Meets or exceeds the physical requirements of ASTM D226, D4869,
and CSA A220-1
• UL Listed for use with a variety of asphalt shingles and other roof
assemblies with an ANSI/UL 790 Class A roofing fire rating
1
• Miami-Dade County Product Control and State of Florida approved
• ICC-ES ESR-3286
• Approx: 10 squares (1,000 ft
2
[92.9 m
2
])/roll (excludes laps);
length 250' (76.2 m); width 48" (1.22 m); 40 lb.
(18 kg)/roll (nominal)
• Listed with Texas Department of Insurance as an acceptable alternate
roof underlayment
Note: Always use plastic cap nails or staples with plastic caps to install Tiger Paw™ Roof
Deck Protection. Do NOT use nails or staples without caps.
1
As per GAF ASTM D570-modified testing.
2
GAF trapezoidal tear strength (lbs) testing per ASTM D4533.
* Note: 180-day UV resistance refers to standardized testing conducted by GAF to ensure the product
will not physically degrade when exposed to UV. It is NOT related to withstanding water, snow,
or wind. While Deck-Armor™ and Tiger Paw™ Roof Deck Protection are water resistant,
they are NOT WATERPROOF. DO NOT USE Deck-Armor™ or Tiger Paw™ Roof Deck
Protection as a temporary roof to protect property or possessions.
• SBS-modified asphalt increases flexibility and provides long-lasting
durability; up to 60 days’ UV exposure resistance
1
• Fiberglass reinforced, so it lies flatter than typical asphalt felts for a more uniform look
• UL Listed for use with a variety of shingles and other roof assemblies with an ANSI/
UL 790 Class A roofing fire rating
2
• Meets or exceeds all physical properties of ASTM D226
• UL ER10689-01 Evaluation Report
• Approx: 2 squares/roll (216 gross ft
2
[20.1 m
2
]); length 65.8' (20.1 m);
width 39.4" (1 m)
(Available in Western U.S. only)
SBS-Modified All-Purpose Underlayment
(Available across the U.S.; not available in Canada)
®
FIRE-RESISTANT ROOF DECK PROTECTION
• The best protection against fire spread and penetration
• Fiberglass reinforced, so it lies flatter than typical asphalt felts
for a better-looking roof
• Will upgrade the UL fire classification of almost any type of roof
(refer to UL Online Certifications Directory for actual assemblies)
• Meets or exceeds ASTM D226 Type II, D4869 Type IV, and D6757
Type I or Type II
• Approx: 3.5 squares/roll (350 ft
2
[32.5 m
2
]) (excludes laps);
length 100' (30.5 m); width 42" (1,067 mm); 52.5 lb. (24 kg)/roll
• Miami-Dade County Product Control and State of Florida approved
• ICC-ES ESR-2053
• Listed with Texas Department of Insurance as an acceptable alternate
roof underlayment
37
1
Note: 60-day UV resistance refers to standardized testing conducted by GAF to ensure the product
will not physically degrade when exposed to UV. It is NOT related to withstanding water, snow,
or wind. While RoofPro
™
SBS-Modified All-Purpose Underlayment is water resistant, it is
NOT WATERPROOF. DO NOT USERoofPro
™
SBS-Modified All-Purpose Underlayment
as a temporary roof to protect property or possessions.
2
Refer to UL Online Certifications Directory for actual assemblies.