Brochure
EnergyGuard
™
Polyiso
EnergyGuard
™
NH Polyiso
EnergyGuard
™
Ultra*
EnergyGuard
™
NH
Ultra*
EnergyGuard
™
Barrier
EnergyGuard
™
NH
Barrier
EnergyGuard
™
HD/HD PLUS
EnergyGuard
™
NH
HD/HD PLUS
Roof
Type
New
• • • • • • • •
Re-cover
• • • • • • • •
Retrofit (metal)
• • • • • • • •
Attribute/Benefit
Highest R-value
• • • • • • • •
Lightweight; easy to handle and cut
• • • • • • • •
Contains no CFCs or HCFCs; has zero ODP
and is EPA compliant
• • • • • • • •
Reinforced cellulosic felt facers
• •
Coated glass fiber
• • •
(bottom)
•
(bottom)
Premium coated glass fiber
•
(top)
•
(top)
• •
Flat board product in 4' x 4' (1.21 m x 1.21 m) or
4' x 8' (1.21 m x 2.44 m)
• • • • • • • •
Tapered board product (4' x 4' [1.21 m x 1.21 m] only)
• • • • • •
Roof Challenges
High-traffic roof
• • • • • •
High-humidity structure
• • • • • •
Resistance to mold (ASTM D3273)
• • • • • •
Achieves an ANSI/UL 790 Class A roofing fire rating over
combustible decks with a 1" (25.4 mm) board thickness
• •
Approved component of Class 1-SH (Hail)
Rated Assembly
• •
Transparency
Red List Free product
• • • •
HPD (Health Product Declaration)
• • • • •
EPD (Environmental Product Declaration)
•
PIMA Quality Mark
• • • •
GreenCircle Certified – Recycled Content
• •
Codes Compliance
C1289/Type II/Class 1/Grade 2 (20 psi)** and
Grade 3 (25 psi)
• •
C1289/Type II/Class 2/Grade 2 (20 psi)** and
Grade 3 (25 psi)
• • • •
C1289/Type 2/Class 4/Grade 1
• • •
C1289/Type 2/Class 4/Grade 2
•
FM (4450/4470)
†
• • • • • •
UL (ANSI/UL 790, ANSI/UL 1256, ANSI/UL 263)
††
• • • •
UL (ANSI/UL 790)
• • • •
Miami-Dade County Product Control Approved
• • • • •
State of Florida Approved
• • • • • •
ROOF INSULATION PRODUCTS
ROOF INSULATION PRODUCTS
Choosing the Right Polyiso Insulation
For Your Roofing System
Choosing the right polyiso for a roofing system can be confusing. There are many different types of
facers and attributes to meet the required energy codes and specifications. So which type of polyiso
meets the needs of the roofing system for your building?
* Class A roofing fire rating over combustible deck when used with single-ply TPO, a total of at least
3" (76 mm) of EnergyGuard
™
Ultra is required; a Class B fire rating is also obtained when using at
least a single layer of 1.5" (38.1 mm).
**Stated dimensional stability tolerance: board thickness shall not diminish by more than 2% max.
†
Refer to FM Approvals RoofNav online for actual assemblies.
††
Refer to UL Online Certication Directory for actual assemblies.
NOTE: With the exception of EnergyGuard
™
HD/HD PLUS Polyiso and EnergyGuard
™
NH HD/NH HD PLUS Polyiso, stated dimensional stability tolerance: board thickness shall not diminish by more
than 2% max. Some membrane systems may require a non-polyisocyanurate cover board, the use of GAFGLAS
®
Stratavent
®
Perforated Venting Base Sheet, or a mechanically attached base sheet over
polyisocyanurate insulations. Check the membrane specification for installation, code, and warranty requirements.
14 15