Use and Care Manual

37
Basic settings en-us
Q Basic settings
Basic settings In the general settings, you can adapt your appliance
individually.
1. Set the program selector to S.
2. Select "General setting" with the rotary selector.
3. Touch the ™ symbol.
4. Set the required general setting with the rotary
selector.
5. Touch the % symbol.
6. Set the general setting with the rotary selector.
7. Save with ™ or cancel with ' and quit the current
general setting.
8. Turn the program selector to 0 to quit the general
setting menu.
Changes are saved.
Basic setting Possible settings Explanation
Brightness Stages 1, 2, 3, 4, 5*, 6, 7, 8 Setting display brightness
Standby screen On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Appearance of the standby screen.
Off: no display. Use this setting to reduce the
standby consumption of your appliance.
On: several displays can be set, confirm "On"
with ™ and choose the desired display with
the rotary selector.
The selection is displayed.
Display screen Minimized*/Standard When ‘Minimized’ is set, only the most import-
ant details are displayed after a short time.
Touchpad color Gray*/White Select the color of symbols on the touchpads
Touchpad tone Tone 1*/Tone 2/Off Select the signal tone when touching a touch-
pad
Touchpad volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touchpad tone
Preheating signal On*/Off The signal tone sounds when the required tem-
perature is reached during preheating.
Signal volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the signal tone
Water filter Available* / not available Available: use appliance with water filter.
Not available: use appliance without water fil-
ter.
Water filter capacity 100 - 9000 liters Set the water filter capacity
Water hardness 1-18 Check mains water with the included carbon
hardness test. Set the measured water hard-
ness.
Time format AM/PM / 24 h* Time display in 24 or 12-hour format