Installation Instructions

13
Levelling the Dishwasher
The unit should now be ready to slide into the cabinet
opening. To avoid scratching the oor, use oor protection
and caution when sliding the dishwasher into the cabinet.
1. Make sure that the hoses and cords do not bunch up
behind the unit or kink as you slide the unit back. Make
certain to slide the unit into place before raising the leg
levelers.
2. Level the dishwasher horizontally by turning feet
clockwise to raise or counter-clockwise to lower front
of the unit. See Figure 21
3. Level the dishwasher vertically by turning center screw
to raise or lower the back.See Figure 21.
4. Be sure there is no space between the top of the
dishwasher and the underside of the counter. Then use a
level to check that the counter is still level. See Figure 22.
Figure 21
Q
Avoid Tip Over Hazard
Do not use the dishwasher until it is completely
installed. When opening the door on an uninstalled
dishwasher, carefully open the door while
supporting the rear of the unit. Failure to follow
this warning can result in serious injury.
WARNING
Figure 22
Pinch Point Hazard!
Sliding parts. Keep ngers out of openings on
inner door!
WARNING
Sliding parts