Use and Care Manual & Installation Guide

Table Of Contents

Installation

Mounting the appliance

1 Mount the appliance and align. ¨

2 Measure the distance from the appliance to the

wall and mark this on the filler strip.

3 If required, shorten the filler strip to the required

dimension. ©

Detaching the appliance

Note: Before removing the appliance, protect the

cook-top with a piece of polystyrene from the

packaging.

1 Use a flat head screwdriver to push in the

fastening bolt, and turn it 90° until it locks into

place. ¨

2 Push in the fastening bolt gently with your

fingers, and turn it until it comes out of the

Grip the bottom of the appliance with one hand

while gently pulling on the fastening bolt with

the other.

3 Carefully remove the appliance.

$ %

 