Operation Manual

23
Stopwatch
The stopwatch will count the elapsed time up to
90 minutes.
The pause function pauses the stopwatch.
The stopwatch runs independently of all other
settings of the appliance.
Starting the Stopwatch
1 Call up the timer menu.
2 Using f or g select the stopwatch function N.
3 Start using the
m key.
The timer menu is closed. The symbol
N and the
elapsing time are shown in the status bar.
A signal sounds when the time has elapsed. Touch
the q key to switch off the signal.
The timer menu is closed immediately when you
touch the
b key.
Pausing the Stopwatch
1 Call up the timer menu.
2 Using f or g select the stopwatch function N.
3 Touch the l key. The counter stops. The key
reverts to start m.
4 Start again using the
m key. The counter
continues.
After 90 minutes the time reverts to 00:00 minutes.
The symbol
N in the status bar disappears. The
stopwatch is switched off.
Note
To cancel the stopwatch:
Call up the timer menu, select the stopwatch
function N and touch the j key.
00.00
165
13:3000.05
06.40