Operation Manual

Power Cut

The appliance bridges a power cut of up to

5 minutes. The operation continues.

After a longer power cut the appliance will switch

off the operation. The

J symbol appears on the

display and three dashes instead of the

temperature.

Switch off the temperature knob and switch the

appliance back on.

The “first settings” menu reappears if the appliance

is without electricity for several days. You have to

set the clock and date.

Note: The basic settings remain stored even if the

appliance is without electricity for several days.

Exhibition Mode

If the x symbol appears on the standby screen,

exhibition mode is activated. The appliance does

not heat up.

Disconnect the appliance from the electricity for a

few seconds (switch off the household fuse or the

circuit breaker in the fuse box). Within 3 minutes

after reconnecting the appliance, go to the basic

settings menu and deactivate exhibition mode.

No Water Available

If the L symbol appears on the left top side of the

display and three dashes instead of the

temperature, there is no water available.

Check the water supply.

13:30

---

13.30

13:30