Use and Care Manual

25
Sabbath mode and Yom Tov mode en-us
5. Start with I .
The appliance starts. / and the temperature appear in
the display. The Sabbath screen will appear as shown.
The oven and display lighting is off. The control panel is
blocked and no tone can be heard when you touch it.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to 0.
Switching off:
To cancel the operation, set the program selector to 0.
Yom Tov mode
With this function, the appliance is programmed to
perform in three stages.
Stage 1 and 2 can be programmed for a maximum total
duration of 74 hours. The duration of Step 3 is 1 hour and
cannot be modified.
Stage 1: maintains a warm temperature of 122° F (50°C)
in the convection heating function. The interior oven
lights remain off through this stage.
Stage 2: the appliance raises to a desired temperature
setting and maintains a temperature between 120 and
450° F (50 -230°C). For warming and cooking foods in
the convection heating function. The desired time can be
adjusted for this stage. The interior oven lights will be on
during this time.
Stage 3: maintains a warm temperature of 122° F (50°C)
in the convection heating function for 1 hour after stage 2
has ended. The interior oven lights will be on during this
time.
Note that easily perishable foodstuffs must not be left in
the oven for too long.
Setting the Yom Tov mode
1. Set the program selector to ž .
2. Touch the / symbol.
The suggested value of 24h at 185° F (85°C) appears
in the display.
To set Stage 2 cooking time with rotary selector:
1. Touch the $ symbol to adjust the duration of Stage 2
cooking time 6 .
2. Set the desired Stage 2 cooking time with the rotary
selector.
3. Touch the C symbol to adjust the end of Stage 2
cooking time 5 .
4. Select the end time with the rotary selector.
5. Change the date if needed by touching the C symbol
to V .
6. Rotate the selector to the desired date.
7. Confirm settings by touching the ™ symbol.
To set Stage 2 temperature:
1. Rotate selector to desired Stage 2 temperature.
2. Start with I .
The temperatures of Stage 1 and Stage 2 appear in the
display. The remaining time to the beginning of Stage 2 is
counted down in the display. The Yom Tov screen will
appear as shown.
The program will begin with the pre-set warm temperature
without light, then advance to the programmed
temperature with light until the end of the set date and
time, and then maintain the pre-set warm temperature for
60 minutes.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to 0.
Switching off:
To cancel the operation, set the program selector to 0.
)
6DEEDWKPRGH
)

)



)
Æ