Instructions for Use

Before using for the first time en-us
15
Other accessories Order number
Cast aluminum roaster GN340230
5.2 Locking function
The locking function prevents the accessories from tilting
when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the oven cavity correctly for the tilt protection to work
correctly.
5.3 Sliding accessories into the oven cavity
The wire rack and the perforated cooking container are
equipped with a locking function. For the tilt protection to
work correctly, always insert the wire rack and the perfo-
rated cooking container into the oven cavity the right way
round.
NOTICE:
The accessories may tip.
▶ Do not push the accessories between the shelf posi-
tions.
1. When inserting the wire rack, ensure that the lug is
facing upwards.
2. Ensure that the safety bracket on the wire rack is lo-
cated at the rear and is facing upwards.
3. When inserting the cooking container, ensure that the
lug is facing upwards.
Note:To completely pull out the accessories, lift them
slightly.
Remove any accessories that you do not require from the
oven cavity.
Before using for the first time
6 Before using for the first time
Before using for the first time
Clean the appliance and the accessories.
6.1 Initial use
Implement the settings for initial use before using your ap-
pliance.
First read the information under Safety.
The appliance must be installed and connected.
After connecting the appliance to the power supply, the
GAGGENAU logo appears for approximately 30seconds
and then the appliance displays the "Initial settings" menu.
You can configure your new appliance for initial use.
The "Initial settings" menu appears only after the appli-
ance has been connected to a power supply and switched
on for the first time, or if the appliance has not been con-
nected to a power supply for a number of days.
You can change all of the settings in the basic settings
→ Page26 .
Setting the language
Requirement:The display shows the preset language.
1. Use the rotary selector to select the required display
language.
2. Press to confirm.
Setting the time format
Requirement:The display shows the possible formats
24h and AM/PM. 24h is preset.
1. Use the rotary selector to set the required format.
2. Press to confirm.
Setting the time
Requirement:The display shows the time.
1. Use the rotary selector to set the required time.
2. Press to confirm.
Set the date format
Requirement:The display shows the possible formats
D.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.
1. Use the rotary selector to set the required format.
2. Press to confirm.
Setting the date
Requirement:The display shows the preset date. The
day setting is already active.
1. Use the rotary selector to set the required day.
2. Press to switch to the month setting.
3. Use the rotary selector to set the month.
4. Press to switch to the year setting.
5. Turn the rotary selector to set the year.
6. Press to confirm.