Instructions for Use

en-us Cleaning and maintenance
32
8. Dispose of the empty cleaning cartridge in accordance
with regional regulations for household garbage.
Causes of an unsatisfactory cleaning result
WARNING
The cleaning agent solution may cause chemical burns in
the mouth, throat and eyes or on the skin.
▶ To prevent the detergent from coming into contact with
your skin or eyes, do not remove the locking cap from a
spent cartridge.
Possible cause Solution
The locking cap is still on
the cleaning cartridge.
After the end of the clean-
ing program, remove the
cleaning cartridge from the
appliance. Do not reuse the
cleaning cartridge. Dispose
of the cleaning cartridge in
accordance with the re-
gional regulations.
The drain filter is missing. Ensure that the drain filter
remains inserted in the
oven cavity floor while the
cleaning program is in
progress.
The power has failed. Following a power failure
that lasts longer than 3min-
utes, the cleaning program
is ended with a short pro-
gram.
Dirt is heavily baked on. Run the cleaning program
again to remove stubborn
dirt.
16.5 Drying program
You can use the drying program to dry the oven cavity
quickly after cleaning or steaming.
The drying program runs for 20minutes.
NOTICE:
Heat damages the water tank.
▶ Do not dry the water tank in the hot oven cavity.
Starting the drying program
1. Set the function selector to ⁠.
2. Use the rotary selector to select the drying program.
a The display shows ⁠.
3. Press to confirm.
a The display shows the drying time as 20minutes.
4. Press to start.
a The display shows the drying time that has elapsed.
a The light in the oven cavity remains switched off.
a A signal sounds after 20minutes.
a The display shows a message.
5. Press to confirm.
a The drying program has ended.
6. Allow the appliance to cool down.
7. Polish the oven cavity and door pane with a soft cloth.
16.6 Descaling program
You can use the descaling program to descale and rinse
the appliance fully automatically using special descaling
tablets.
NOTICE:
Limescale may damage the appliance.
▶ Descale the appliance regularly.
Using the wrong descaler may damage the appliance.
▶ Only use the specified descaling tablets.
The descaling tablet may damage the oven cavity.
▶ Use the descaling tablet for the descaling program only.
▶ Place the descaling tablet into the water tank.
▶ Never place the descaling tablet in the oven cavity or
heat it up in the oven cavity.
The descaling tablets can be obtained from customer ser-
vice, our website or the online shop.
If you descale the appliance regularly, your appliance will
be in a good condition.
Depending on the water hardness and the use of the ap-
pliance, a message on the display reminds you to run the
descaling program.
To prevent damage to the appliance, the appliance locks
the operating modes that use steam after this message
has been repeated. You can still use the appliance to run
operating modes that do not require steam. You can only
use the appliance without any restrictions after you have
run the descaling program.
The descaling program takes 1hour 45minutes from be-
ginning to end. After 1hour 30minutes, empty, clean and
refill the water tank.
Even if you use a water-descaling system, descaling may
be necessary, depending on the water type and your use
of the appliance.
Preparing the descaling program
WARNING
The descaling tablets may cause chemical burns in the
mouth, throat, eyes and on the skin.
▶ Follow the safety instructions on the packaging of the
descaling tablets.
▶ Avoid the skin coming into contact with the descaling
tablets.
▶ Keep children away from the descaling tablets.
The descaling solution may cause chemical burns in the
mouth, throat and eyes or on the skin.
▶ Avoid the skin coming into contact with the descaling
solution.
▶ Keep children away from the descaling solution.
▶ Do not drink the descaling solution.
▶ The descaling solution must not come into contact with
food.
▶ Clean the water tank in the dishwasher or thoroughly by
hand before you next use the appliance.
NOTICE:
Using the wrong descaler may damage the appliance.
▶ Only use the specified descaling tablets.
1. Set the function selector to ⁠.
2. Use the rotary selector to select the descaling program.
You cannot cancel the descaling program. Always allow
the descaling program to run to the end.
a The display shows ⁠.
3. Press to confirm.