Use and Care Manual
22
en-us Timer functions
3. Start with I.
The Timer menu closes and the timer starts to run. The
symbol for the timer Š appears on the display and the
time can be seen counting down.
1. Launch the timer menu.
2. With C, select the "Stopwatch" function p.
3. Start with I.
The timer menu is closed and the time runs. The p
symbol and the elapsing timer are shown in the display.
Stopping and restarting the stopwatch
1. Launch the timer menu.
2. With C, select the "Stopwatch" function p.
3. Touch the H symbol.
The time stops. The symbol changes to Start I again.
4. Start with I.
The time continues to run. Once 90 minutes have been
reached, the display pulsates and a signal sounds. It
goes off when you touch the ™ symbol. The p symbol
disappears from the display. The operation has ended.
Switching off the stopwatch:
Launch the timer menu. With C, select the "Stopwatch"
function p and touch the Ž symbol.
Cooking time
If you set a cooking time for your meal, the appliance
switches off heating automatically after this time has
elapsed.
You can set a cooking time from 1 minute to 23:59 hours.
Setting the cooking time
You have set the heating function and temperature and
you have placed your dish in the oven interior.
1. Touch the M symbol.
2. With C, select the "Cooking time" function 6.
A signal sounds once the time has elapsed. The audible
signal ceases if you touch the ™ symbol.
You can exit the Timer menu at any time by touching the '
symbol. This way, the settings are lost.
Suspend timer:
Call up the Timer menu. Select the "Timer" function with
C, select Š, and touch the H symbol. To let the timer run
on, touch the I symbol.
Switch off the timer early:
Call up the Timer menu. Select the "Timer" function with
C, select Š, and touch the Ž symbol.
Stopwatch
The stopwatch runs independently of the other appliance
functions.
The stopwatch counts up from 0 seconds to 90 minutes.
It has a pause function. Therefore, you can stop the timer
in between times.
Starting the stopwatch
6WRSZDWFK
6WRSZDWFK