Use and Care Manual

28
en-us Automatic programs
Personal recipes
You can save up to 50 individual recipes. You can record
a recipe. You can assign these recipes a name so that
you can fall back on them quickly and conveniently if you
need them.
Recording a recipe
You can set up to five phases in succession and you can
record them.
1. Set the program selection to the required heating
function.
The i symbol is displayed.
2. Touch the i symbol.
3. Choose a free storage location with the rotary
selector.
4. Touch the g symbol.
5. Set the desired temperature with the rotary selector.
6. The cooking time is recorded.
7. Recording another phase:
Set the program selection to the required heating
function. Set the required temperature with the rotary
selector. A new phase begins.
8. Once the appliance has achieved the desired cooking
result, touch the & symbol to end the recipe.
9. Enter the name under "ABC". ~ "Entering a name"
on page 29
Notes
▯ Recording a phase does not begin until the appliance
has reached the set temperature.
▯ Every phase must last at least one minute.
▯ During the first minute you can change the heating
function or the temperature.
Enter the core temperature for a phase:
Insert the core temperature probe in the socket in the
oven interior. Set the heating function and temperature.
Touch the + symbol. With the rotary selector, enter the
required temperature and confirm it with +.
Programming a recipe
You have the option of programming and saving up to five
phases of preparation.
1. Set the program selection to the required heating
function. Set the required temperature with the rotary
selector.
The i symbol is displayed.
2. Touch the i symbol.
3. Choose a free storage location with the rotary
selector.
4. Touch the % symbol. ~ "Entering a name"
on page 29
5. Enter the name under "ABC".
6. Choose the first phase with the C symbol.
The heating function and temperature set at the start
are displayed. You can change the heating function
and temperature with the rotary selectors.
7. Choose the time setting with the C symbol.
8. Set the required cooking time with the rotary selector.
9. Choose the next phase with the C symbol.
- or -
Preparation is complete, end input.
10. Save with ™.
- or -
Cancel with ' and quit the menu.
Enter the core temperature for a phase:
Choose the next phase with the C symbol. Set the
heating function and temperature. Touch the + symbol.
With the rotary selector, enter the required temperature
and confirm it with +.
Note: For phases for which a core temerature has been
programmed you cannot set a cook time.
)

)
