Instructions for Use
Table Of Contents
- Combination steam oven
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic Operation
- 8 Timer functions
- 9 Long-term timer
- 10 Childproof lock
- 11 Automatic programs
- 12 Individual recipes
- 13 Core temperature probe
- 14 Home Connect™
- 15 Basic settings
- 16 Cleaning and maintenance
- 17 Troubleshooting
- 18 How it works
- 18.1 General cooking tips
- 18.2 Vegetables
- 18.3 Fish
- 18.4 Fish – low-temperature steaming
- 18.5 Meat – cooking at higher temperatures
- 18.6 Fish and poultry – low-temperature cooking
- 18.7 Poultry
- 18.8 Sous-vide cooking
- 18.9 Grilling
- 18.10 Side dishes
- 18.11 Desserts
- 18.12 Miscellaneous
- 18.13 Baked goods
- 18.14 Dough proving - leaving to rise
- 18.15 Reheating – warming
- 18.16 Defrosting
- 18.17 Preserving food
- 18.18 Juicing – berries
- 18.19 Preparing yogurt
- 18.20 Preparing bulky food
- 18.21 Tips for keeping acrylamide levels to a minimum when cooking
- 19 Disposal
- 20 Customer Service
- 21 STATEMENT OF LIMITED PRODUCT WARRANTY
Familiarizing yourself with your appliance en-us
13
4.3 Standby
The appliance switches to standby mode if no function is
set or the childproof lock is activated. The standby screen
appears if you do not implement any settings for a long
time.
Different things can be displayed in standby mode. The
GAGGENAU logo and the time are preset.
In standby mode, the brightness of the control panel is re-
duced. The brightness of the display depends on the verti-
cal viewing angle. You can change the display and the
brightness at any time in the basic settings →
Page26
.
When "Off" is selected for the standby screen in the basic
settings, you must turn the function selector to exit
standby mode.
When the door is open, the interior lighting switches off af-
ter a short time.
4.4 Additional information
Press to display additional information, e.g. information
about the type of heating that is set or the current interior
oven temperature.
During continuous operation after heating up, slight tem-
perature fluctuations are normal.
The appliance displays the symbol for important infor-
mation and indicates that an action is required. The appli-
ance also occasionally displays important information
about safety and the operating status automatically. These
messages disappear automatically after a few seconds, or
press to confirm the message.
For messages about HomeConnect™, the appliance also
displays the HomeConnect™ status in the symbol.
4.5 Cooling fan
The cooling fan switches on when the appliance is in oper-
ation. The hot air escapes above the door.
After removing your food from the appliance, keep the
door closed until the appliance has cooled down. The ap-
pliance door must not be left half open as this may dam-
age adjacent kitchen units. The cooling fan continues run-
ning for a certain period after the appliance has stopped
heating; afterwards, it switches itself off automatically.
Do not cover the ventilation slots. Otherwise, the appli-
ance may overheat.
4.6 Drying the oven cavity
After operation with a steam function, the oven cavity is
damp. The cooling fan and the fan wheel on the back wall
of the oven cavity continue to run for a while after the ap-
pliance is switched off and then they switch off automati-
cally.
The process of drying the oven cavity may take up to
95minutes. Keep the appliance door closed while the
oven cavity is being dried.
4.7 Safety switch off
For your safety, the appliance has a safety switch-off func-
tion. The appliance switches off any heating process after
12hours if the appliance controls are not used during this
time. The display shows a message.
For programming with the long-term timer, the appliance
does not activate the safety switch-off function.