Instructions for Use

Timer functions en-us
17
¡ Full surface grill setting 1 + humidity
¡ Full surface grill setting 2 + humidity
¡ Sous-vide cooking
The steam removal function is also available for a short
time after switching off the appliance.
The appliance carries out steam removal automatically at
the end of an automatic program → Page19 or a timed
program (cooking time → Page18 ).
Starting steam removal
▶ Press ⁠.
Steam removal takes approximately 25 seconds.
During steam removal, the heater is switched off.
Stopping steam removal early
▶ Open the appliance door or press ⁠.
7.7 After each use
After using the steam type of heating, dry the oven cavity
to ensure that no moisture remains in the appliance and to
prevent odor from building up.
WARNING
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the temper-
ature.
▶ Open the appliance door carefully.
▶ Keep children away from the appliance.
Drying the oven cavity
Note:In order to dry the oven cavity, the cooling fan and
the fan wheel on the back wall of the oven cavity continue
to run for a while after the appliance is switched off. They
then switch off automatically. The process of drying the
oven cavity may take up to 95minutes.
1. Keep the appliance door closed while the oven cavity is
being dried.
2. Remove food residues and/or dirt from the oven cavity
as soon as the appliance has cooled down.
Burnt-on food residue and/or dirt will be much harder to
remove later.
3. If required, you can use the drying program to dry the
oven cavity quickly. Drying program → Page32
4. Once the oven cavity has cooled down, polish it with a
soft cloth.
5. If necessary, wipe dry any condensation on units or
handles.
7.8 Switching on the appliance after a safety
shut-off
Requirement:After prolonged operation, the safety shut-
off function → Page13 switches off the appliance.
1. Turn the function selector to ⁠.
2. Switch theappliance back on again.
Timer functions
8 Timer functions
Timer functions
Your appliance has different timer functions, with which
you can control its operation.
8.1 Overview of the timer functions
Use to select the different timer functions.
Timer function Use
Short-term timer
Cooking time
1
Cooking time end
1
Stopwatch
1
Not available in standby mode
8.2 Calling up the timer menu
Note:You can call up the timer menu from any operating
mode. The timer menu is not available if you turn the func-
tion selector to in the basic settings.
▶ Press ⁠.
a The display shows the timer menu.
8.3 Exiting the timer menu
▶ Press ⁠.
a The timer menu is closed.
a Any settings that are not saved are lost.
Note:You can exit the timer menu at any time.
8.4 Short-term timer
The short-term timer runs independently of the other appli-
ance settings. You can enter a maximum of 90 minutes.
Setting the short-term timer
1. Press ⁠.
a The display shows the "Short-term timer" function.
2. Use the rotary selector to set the required time.
3. Press to start.
a The appliance closes the timer menu.
a The time counts down.
a The display shows and the time that has elapsed.
a A signal sounds once the time has elapsed.
4. Press ⁠.
a The signal tone stops.
Stopping the short-term timer
1. Press ⁠.
a The display shows the "Short-term timer" function.
2. Press ⁠.
a The short-term timer stops.
a The display shows ⁠.
3. To allow the timer to continue counting down, touch ⁠.
Switching off the short-term timer early
1. Press ⁠.
a The display shows the "Short-term timer" function.
2. Press ⁠.