Instructions for Use

Cleaning and maintenance en-us
31
4. Ensure that the drain filter remains inserted in the oven
cavity floor while the cleaning program is in progress.
If you remove the drain filter before the cleaning pro-
gram is started, the oven cavity will not be clean.
5. Press to confirm.
6. In order to loosen the cleaning powder, gently tap the
cartridge against the countertop.
7. Remove the locking cap from the cleaning cartridge.
‒ Do not remove the wax plugs from the opening of the
cleaning cartridge.
‒ Do not use any other cleaning agents.
‒ Do not use damaged cartridges.
8. Screw the cleaning cartridge fully into the socket in
the top of the oven cavity.
Starting the cleaning program
1. Close the appliance door.
2. Press to confirm.
a The display shows the cleaning time of 3:45.
3. Press to start.
a The cleaning time counts down on the display.
a The light in the oven cavity remains switched off.
a The appliance door is locked.
a Once the cleaning program has finished, a signal
sounds.
a The appliance unlocks the appliance door.
a The display shows a message.
Ending the cleaning program
1. Remove the cleaning cartridge.
2. Turn the drain filter in the oven cavity floor counterclock-
wise and remove it ⁠.
3. Remove any food remnants from the drain filter.
4. Rinse out the drain filter under running water.
5. Press to confirm.
a The cleaning program is complete.
6. Allow the appliance to cool down.
7. Polish the oven cavity and door pane with a soft cloth.
‒ If required, remove the white streaks in the oven cav-
ity and on the door pane with a damp cloth.
Depending on the water hardness, the final rinse may
leave white streaks in the oven cavity and on the door
pane after drying.