Instructions for Use

en-us Before using for the first time
14
Appliance height 34" with silverware drawer
Level Upper rack Lower rack
1 max. ø 7" 13"
2 max. ø 8" 12"
3 max. ø 9" 11"
Before using for the first time
8 Before using for the first time
Before using for the first time
Apply the settings for the first use.
8.1 Initial use
Before the first use, or after a factory reset, you will need
to configure the settings.
Tip:Connect your appliance to a mobile device. You can
conveniently change all settings using the HomeCon-
nect™ app.
→ "HomeConnect™ quick start", Page23
Requirement:The appliance has been installed and con-
nected.
1. Add special salt.
2.
Add rinse aid. → Page15
3. Switch on the appliance.
a The display shows the settings for initial use.
4. Press repeatedly until the display shows the required
setting.
Note:If you select HomeConnect™ with the setting Ini-
tial use , make further settings using the HomeCon-
nect™ app on your mobile device.
You can change the settings for initial use and other Ba-
sic settings → Page22 on the appliance at any time or
using the HomeConnect™ app on your mobile device.
5. Press or repeatedly until the display shows the
right value.
You can change one or more settings.
6. To save the settings, press for approx. 3seconds.
7. Add detergent.
8. Start the Program with the highest cleaning temperature
without dishware.
To remove any marks from water or other residues, we
recommend you operate the appliance without dishware
before using it for the first time.
Water softening system
9 Water softening system
Water softening system
Hard water leaves limescale on dishware as well as the
washing tank, and parts of the appliance may become
blocked.
To ensure good dishwashing results, you can treat the wa-
ter with special salt and the water softening system. To
avoid damage to the appliance, water with a hardness
above 9°E must be softened.
9.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.
You can find out how hard your water is from your local water company or by using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 soft 0 - 1.1 0 - 8
9 - 10 soft 1.2 - 1.4 9 - 10
11 - 12 medium 1.5 - 1.8 11 - 12
13 - 15 medium 1.9 - 2.1 13 - 15
16 - 20 medium 2.2 - 2.9 16 - 20
21 - 26 hard 3.0 - 3.7 21 - 26
27 - 38 hard 3.8 - 5.4 27 - 38
39 - 62 hard 5.5 - 8.9 39 - 62
Note:Set the water hardness determined on your appli-
ance.
→ "Setting the water softening system", Page14
With a water hardness of 0 - 8°E you can dispense with
special salt for dishwashers and switch off the water soft-
ening system.
→ "Switching off the water softening system", Page15
9.2 Setting the water softening system
Set the water hardness on your appliance.
1. Determine the water hardness and the appropriate set-
ting value.
→ "Overview of water hardness settings", Page14
2. Press ⁠.
3. To open the basic settings, press for approx. 3sec-
onds.
4. Press repeatedly until the display shows "Water hard-
ness".