Use and Care Manual
Table Of Contents
- Dishwasher
- DF250/DF251
- Table of contents
- en-us Operating instructions
- ( IMPORTANT SAFETY INSTRUCTIONS 7
- ƒ Causes of Damage 10
- * Getting Started 11
- Home Connect™ System 15
- + Water softening system / special salt 16
- , Rinse Aid 18
- Loading the Dishwasher 20
- . Detergent 28
- / Dishwasher Cycles 30
- 0 Dishwasher Cycle Options 31
- 1 Operating the Dishwasher 32
- 2 Care and Maintenance 36
- 3 Troubleshooting 40
- 4 Customer Service 47
- ‡ Statement of Limited Product Warranty 47
- 5 Installation and connection 49
- ( Safety Definitions
- ( IMPORTANT SAFETY INSTRUCTIONS
- en-us Operating instructions
- Table des matières
- fr-ca Notice d'utilisation
- ( CONSIGNES DE SÉCURITÉ IMPORTANTES 57
- ƒ Causes de pannes 60
- * Mise en marche 61
- Home Connect™ 65
- + Système d'adoucissement de l'eau / sels 67
- , Produit de rinçage 69
- Chargement du lave-vaisselle 71
- . Détergent 79
- / Cycles du lave-vaisselle 81
- 0 Options de cycles du lave-vaisselle 82
- 1 Mise en marche du lave-vaisselle 84
- 2 Entretien et maintenance 88
- 3 Dépannage 92
- 4 Service à la clientèle 101
- ‡ Déclaration de la garantie limitée du produit 101
- 5 Installation et raccordement 104
- ( Indications de sécurité
- ( CONSIGNES DE SÉCURITÉ IMPORTANTES
- fr-ca Notice d'utilisation
15
Getting Started en-us
Home Connect™ System
This dishwasher is Wi-Fi capable and can be remotely
controlled via a mobile device.
If your dishwasher does not connect to the home
network, you can also operate the dishwasher manually
by pressing the buttons.
Refer to appliance overview for the location of the
buttons. ~ "Appliance overview" on page 11
Setting up the app
To be able to operate the appliance via Home Connect,
the Home Connect app must be installed on your mobile
device.
Observe the supplied Home Connect documents with
regard to this.
Follow the steps specified by the app to implement the
settings.
Setting up Home Connect
You can set your dishwasher by pressing the remote
start button h or proceed as follows:
1. Open the door.
2. Switch on the On/Off switch (.
3. Press Info button 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > h until the required setting
is indicated on the display window at the top @.
5. Make the setting with setting buttons + - X. See
table in section
6. Press and hold the Info button 8 for 3 seconds.
The chosen setting has now been stored.
WLAN |
In the WLAN menu you can activate the wireless
network connection with “on” and deactivate it with
“off”.
Notes
▯ If you have selected the Wi-Fi “off” setting, the
“Network login” and “Connect to App” settings are
not available.
▯ Remote control of the appliance requires a stable
wireless network connection.
Network login
In the “Network login” menu you can select between
“Automatic/WPS” and “Manual” to connect the
dishwasher to your home network. To do this, test the
WPS function on your router.
Refer to Home Connect leaflet for detailed instructions.
Automatic: Connect to the home network using the WPS
function of your router.
Manual: Connect your mobile device to the Home
Connect network. The network settings are then
manually entered using the Home Connect App to
connect to your home network.
Following successful connection, the following text is
indicated on the display window at the top @:
“Network login successful”.
Note: The “Network login” menu item is not available
unless you have activated WLAN.
Connect to App
The “Connect to App” menu option is not available
unless there was a connection to the home network.
The “Connect to App” setting establishes the link
between the dishwasher, App and your user account.
Following successful connection, the following text is
indicated on the display window at the top @:
“Connection to app successful”.
Refer to the Home Connect leaflet for further
information.