Use and Care Manual

Rinse Aid en-us

Unloading the dishwasher

 CAUTION!

Dishes can be very hot immediately after cycle

ends. Open the door slightly and allow dishes to

cool for a few minutes before unloading.

Note: Dishes are more likely to chip when unloading

before cooling.

When unloading the dishwasher, to prevent water from

dripping onto dry dishes, unload the lower

rack 1j first. Next, unload the silverware

basket 1b followed by the upper rack 12, and then

the third rack (if equipped).

Adjusting the height of the rack

Ad j u s t i n g the hei gh t of the rack

The height of the upper rack 12 can be adjusted to

create more space for taller utensils either in the upper

or lower rack.

Arrange large plates up to a diameter of 12.25 in

(31 cm) in the lower basket 1j as illustrated.

RackMatic

System

The height of the upper rack 12 can be adjusted in

3 steps to create more space for larger items in the

lower rack.

1. Pull the upper rack out of the dishwasher until it

stops.

2. To lower the rack, push the RackMatic® lever inward.

3. To raise the rack, hold the basket on the sides of the

upper rack and lift it up.

Note: Check spray arm for clearance after adjustment.

Upper rack Lower rack

Setting 1 max. ø 7 in (18 cm) 12.25 in (31 cm)

Setting 2 max. ø 8 in (20.5 cm) 11.5 in (29 cm)

Setting 3 max. ø 9 in (23 cm) 10.5 in (26.5 cm)