Owner's Manual

13
Getting Started en-us
Switching on the appliance for the first
time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top @:
Scroll with < >
Set with + -
Leave with t 3 sec.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1. Keep pressing button > )* until the required setting
is displayed.
2. Make the selection with setting buttons + - X.
3. Press and hold the Info button ( 8 for 3 seconds.
The selected setting has now been stored.
Settings
The dishwasher has been preset with certain settings
for your convenience. You can change these factory
setting.
Change the setting as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button ( 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
4. Keep pressing button > )* until the required setting
is displayed.
5. Make the selection with setting buttons + - X.
6. Press and hold the Info button ( 8 for 3 seconds.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.
Settings
Switching on the appliance
for the first time
Factory setting Infotext
by pressing Info button (
Language American English Language selection.
Time format 24h 12h or 24h.
Time setting 12:00 Set the current time.
Water hardness °E 0 Setting water hardness. When using Multitabs, select the
lowest setting.
Rinse aid disp. Level 5 Amount of rinse aid affects drying. When using Multitabs,
select setting 0.