Instructions for Use
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Childproof lock
- 4 Environmental protection and energy-saving
- 5 Familiarizing yourself with your appliance
- 6 Dishwasher Cycles
- 7 Options
- 8 Features
- 9 Before using for the first time
- 10 Water softening system
- 11 Rinse aid system
- 12 Detergent
- 13 Dishware
- 14 Basic Operation
- 14.1 Protection against unintentional operation
- 14.2 Opening the appliance door
- 14.3 Switching on the appliance
- 14.4 Setting a cycle
- 14.5 Setting options
- 14.6 Setting the electronic delay time
- 14.7 Starting the wash cycle
- 14.8 Interrupting the wash cycle
- 14.9 Terminating the wash cycle
- 14.10 Displaying wash cycle information
- 14.11 Switching off the appliance
- 15 Basic settings
- 16 Home Connect™
- 17 Cleaning and maintenance
- 18 Troubleshooting
- 19 Transportation, storage and disposal
- 20 Customer service
- 21 Technical specifications
- 22 Statement of Limited Product Warranty
Basic settings en-us
29
Basic settings
15 Basic settings
Basic settings
You can configure your appliance to meet your needs.
15.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
Time setting 00:00 - 24:00 Set the current time.
The setting depends on the time format selected.
Time format 12 h
24 h
1
Set the time format.
Time display In hours
Time
1
Set the time display for the end of the wash cycle.
"Finish in" shows the remaining time the wash cycle still
has to run, e.g. 3h25min.
"Finish at" shows the time when the wash cycle will end,
e.g. 3:20pm.
Sprache/Language See selection on the appli-
ance.
Select the menu language.
Water hardness 0 - 62
0 - 8
1
Set the water hardness.
→
"Overview of water hardness settings", Page22
Rinse aid disp. 0 - 6
5
1
Set or switch off the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page23
Sensor setting Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
→
"Sensors", Page7
Extra Dry on
off
1
Switch "Extra Dry" on or off for each operation.
The temperature is increased during the final rinse for a
better drying result. This may increase the run time slightly.
Please take care with delicate dishware.
Eco forecast on
off
1
Switch EcoCheck on or off.
When selecting the wash cycle, the average water and en-
ergy consumption is briefly shown on the display.
Emotion Light™ off
On via main switch
1
On when opening door
Switch the interior lighting of the appliance on or off.
When the appliance door is opened, the interior lighting
switches off automatically after 10 minutes.
Remaining time proj. on
1
off
Switch "Remaining time proj." on or off.
While the cycle is running, status information is projected
onto the floor below the appliance door, e.g. the remaining
run time. If the base panel is pulled forward or if the appli-
ance is installed at eye level with the cabinet front fitted
flush, the display is not visible.
Start program Auto 127-140°F
1
Prog. last selected
Set a default program for when the appliance is switched
on.
Tone volume Scale with multiple levels. Set the signal volume at the end of a wash cycle.
Level 0 switches the signal tones off.
Button volume Scale with multiple levels Set the button volume during operation.
Level 0 switches the button tones off.
Child-proof lock on
off
1
Switch the Electric childproof lock →
Page7
on or off.
WLAN on
off
Switch the wireless network connection on or off.
The basic setting "WLAN" is not available until you have
connected the appliance with the HomeConnect™ app.
→
"HomeConnect™ ", Page30
Remote Start off
Manual
Permanent
Activate or deactivate .
The basic setting is not available until you have connected
the appliance with the HomeConnect™ app.
→
"HomeConnect™ ", Page30
1
Factory setting (may vary according to model)