Spec Sheet

VI 422 613
Stainless steel frame
Width 15" (38 cm)
Installation accessories
In combination of several Vario
cooktops or VL 414 downdraft,
connecting strips must be used.
Choose respective VA 420 strip from
one of the below, depending on type
of installation.
VA 420 010
Connection strip for combination
with other Vario 400 series appliances
for surface mounting.
VA 420 000
Connection strip for combination
with other Vario 400 series appliances
for flush mounting.
Optional accessories
GP 900 001
Stainless steel frying pan
Non-stick cooking, ø 6".
G P 900 002
Stainless steel frying sensor pan
Non-stick coating, ø 7".
GP 900 003
Stainless steel frying pan
Non-stick coating, ø 8".
Vario 400 series flex induction cooktop
VI 422
– Flex induction for combining the
rectangular cooking areas
– Free positioning of cookware
inside combined cooking areas
– Frying sensor function for
temperature control in pans
– Easy control of all functions with
bi-colored display
– Solid stainless steel control knob
– Precision-crafted 3 mm stainless
steel
– For surface mounting with a visible
edge or for flush mounting
– Can be combined with other
Vario 400 series products
Cooking zones
2 flex induction cooking areas
Small area: 7 ½" x 9" (2,200 W, with
booster 3,700 W)
Large area: 15" x 9" (3,300 W, with
booster 3,700 W)
Operation
Control knobs with illuminated
ring, cooking zone and output level
markings.
Electronic control in 12 output levels.
User friendly control with bi-colored
display (white / orange).
Features
Flex function for rectangular
cooking areas.
Frying sensor function.
Booster function.
Stopwatch.
Short-term timer.
Options menu.
Power management.
Cooktop-based ventilation control
(with suitable hood).
Home network integration for digital
services (Home Connect) wireless via
WiFi. The use of the Home Connect
functionality depends on the Home
Connect services, which are not
available in every country.
For further information please check:
home-connect.com.
Safety
Operation indicator.
Pot detection.
2-stage residual heat indication.
Safety shut-off.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific location of the cut-out and
the knob positions may vary.
The drawing "Installation of the control
knob" must be observed if the panel
is more than 1" thick (there must be a
recess at the rear).
If combining several Vario 400
series appliances, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
The weight bearing capacity
and stability, in the case of thin
countertops in particular, must
be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in countertops
made of stone, synthetics or solid
wood.
Heat resistance and watertight sealing
of the cut edges must be observed.
Concerning other materials please
consult the countertops manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in
individual cut-outs allow for a minimum
distance of 2" between the cooktops.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of flat bottom
cookware is recommended.
Immersion depth 2 ⅝" – 2 ¾"
depending on type of installation.
Front panel thickness ⅝" – 1".
Appliance can be snapped into the
countertop from above.
Appliance weight: approx. 22 lbs.
Rating
Total rating: 3.6 kW.
Total Amps: 15 A.
208/220–240 V / 60 Hz
Total connected load 3.6 kW.
Plan for a 59" connecting cable
without plug (hard wire required).
www.gaggenau.com/us
Revised: 28 August 2020