Specification Sheet

VI 422 613
Stainless steel frame
Black glass ceramic
Width 15" (38 cm)
Installation accessories
In combination of several Vario
cooktops, connecting strips must
be used. Choose respective VA 420
strip from one of the below, depending
on type of installation.
VA 420 000
Connection strip for combination
with other Vario 400 series for
flush mounting.
VA 420 010
Connection strip for combination
with other Vario 400 series for
surface mounting.
Optional accessories
GP 900 001
Stainless steel frying pan
Non-stick cooking, ø 6".
G P 900 002
Stainless steel frying sensor pan
Non-stick coating, ø 7".
GP 900 003
Stainless steel frying pan
Non-stick coating, ø 8".
Combinable with:
VL414712
AL400721
AI442720 / AI442760
AW442720 / AW442760
AF210791
Good to know:
Wall installations require the hood to
be as large as the cooktop(s). Island
installations require the hood to be
larger than the cooktop(s).
Vario 400 series flex induction cooktop
VI 422
– Free positioning of cookware
inside combined cooking areas
– Frying sensor function for
temperature control in pans
– Easy control of all functions with
bi-coloured display
– Solid stainless steel control knobs
– Precision crafted ⅛" stainless steel
frame
– For surface-mount installation with a
visible edge or for flush installation
– Can be perfectly combined with
other Vario 400 series appliances
Cooking zones
2 flex induction cooking areas.
Small area: 7 ½" x 9"
(2200 W, with booster 3700 W),
Large area: 15" x 9"
(3300 W, with booster 3700 W).
Operation
Control knobs with illuminated ring,
cooking zone and output level
markings.
Electronic power control in 17 output
levels.
User friendly control with bi-coloured
display (white / orange).
Features
Flex function for rectangular cooking
areas.
Frying sensor function.
Booster function.
Stopwatch.
Short-term timer.
Options menu.
Power management.
Cooktop-based ventilation control
when paired with VL 414 712
downdraft.
Home network integration for digital
services (Home Connect) wireless
via WiFi.
The use of the Home Connect
functionality depends on the Home
Connect services, which are not
available in every country. For further
information please check:
home-connect.com.
Safety
Operation indicator.
Pot detection.
Digital 2 stage residual heat indicator
Safety shut-off.
Planning notes
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific location of the cut-out and
the knob positions may vary.
The drawing "Installation of the control
knob" must be observed if the panel
is more than 1" thick (there must be a
recess at the rear).
If combining several Vario 400
series appliances, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
The weight bearing capacity
and stability, in the case of thin
countertops in particular, must
be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in countertops
made of stone, synthetics or solid
wood.
Heat resistant and watertight sealing
of the cut edges must be observed.
For a suitable heat resistant filler
please consult the countertops
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in
individual cut-outs allow for a minimum
distance of 2" between the cooktops.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of flat bottom
cookware is recommended.
Immersion depth 2 ⅝" – 2 ¾"
depending on type of installation.
To insure that the appliance works
correctly, the cooktop must be
sufficiently ventilated either from the
rear or base of the cabinet.
Please see the installation instructions
for further detail.
Appliance can be snapped into the
countertop from above.
Appliance weight: approx. 22 lbs.
If installing several appliances in
individual cut-outs allow for a division
bar of inimum 1 ³¹⁄₃₂" (50 mm) between
the individual cut-outs.
"Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of flat bottom
cookware is recommended."
Appliance can be snapped into the
countertop from above.
Appliance weight: approx. 22 lbs.
Rating
Rating: 3,120 W (208 / 220 V)
3,600 W (240 V)
Minimum fuse protection: 15 A
Electrical: 208 / 220–240 V / 60 Hz
Electrical connection:
Hardwire required, 59" cable length.
www.gaggenau.com/us
Revised: June 2021