Product specification sheet

V L 414 712
stainless steel
Air extraction / Air recirculation
Control knob with illuminated ring
included
Installation accessories
A D 410 040
Flexible connecting piece
A D 851 041
Connecting piece for extension with
flat duct DN 150 for extra deep
countertop
V A 420 000
Connection strip for combination with
other Vario appliances of the 400 series
for flush mounting
V A 420 010
Connection strip for combination with
other Vario appliances of the 400 series
for surface mounting
Optional accessories
A A 414 010
Air deflector used with VL414
downdraft adjacent to VG415 or
VG425 cooktops.
Combinable with:
Vario cooktops 400 series
VI414
VI422
VG415
VG425
VP414
VR414
Vario downdraft ventilation 400
series
V L 414
– Can be combined perfectly flush
with other Vario appliances of the
400 series
– Precision crafted 3 mm stainless
steel
– Solid stainless steel control knob
– Highly efficient, low noise
recirculation system with
AR 410 710 blower
– Air extraction with AR 400 742,
AR 403 722, or AR 401 742
blowers.
– Function for automatic,
sensor-controlled power
adjustment depending on the
build-up of cooking vapors
– Minimal planning and easy
installation
Features
Control knobs with illuminated ring
included in delivery.
3 electronically controlled power levels
and 1 intensive mode.
Automatic function with sensor-controlled
run-on function.
Large-scale metal grease filter with
high grease absorption.
Grease filter, dishwasher-safe.
Grease filter and activated charcoal
filter saturation indicator.
Airflow-optimised interior for efficient
air circulation.
Interval ventilation, 6 min.
Enameled cast iron ventilation grill,
dishwasher-safe.
Air exhaust bend included in delivery.
Overflow 8.5 oz capacity.
Cooktop-based ventilation control
(with VI414 and VI422 cooktops).
Home network integration for digital
services (Home Connect) either via
cable connection LAN (recommended)
or wireless via WiFi.
The use of the Home Connect
functionality depends on the Home
Connect services, which are not
available in every country. For further
information please check:
home-connect.com.
Planning notes
For each VL one blower is recommen-
ded.
Maximum cooktop width between two
VL: 24" (60 cm).
Vario cooktops like Vario electric grill
and Vario gas wok must be placed
between 2 VL downdraft for optimal
performance.
In case of Vario electric grill,
recirculation is not recommended.
If operated next to gas appliances, the
air deflector AA 414 010 is recommen-
ded to ensure maximum performance
of the cooktop.
Appliance can be snapped into the
countertop from above.
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific location of the cut-out and
the knob positions may vary.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type of
installation, the corresponding
connection strip must be provided.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the countertop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
Connection
Connecting cable for blower is 68"
(1.75 m).
Plan a ethernet cable for distances
where the blower is located over 68"
(1.75 m)
www.gaggenau.com/us
Revised: June 2021