Use and Care Manual
CARE SHEET
PAGE 2
Decalcifying
Tools Required:
1. Gaggia Decalcifying Solution
2. One container that will hold the same amount of liquid as your water reservoir
3. Another small container to catch water from the group head
The following Gaggia Super-Automatic Machines feature automatic descaling cycles:
Accademia, Titanium, Titanium Oce, Syncrony Compact Digital, Syncrony Digital, Platinum Swing, Platinum Swing
Up, Platinum Vision
The following Gaggia Super-Automatic Machines require that you descale them manually with the
following process:
Syncrony Logic, Syncrony Compact, Brera, Platinum Vogue, Unica
1. Remove the machine’s water reservoir and empty all of the liquid from it.
2. Mix or dilute your Gaggia Decalcifying Solution according to the directions in a separate container.
3. Fill the reservoir with the solution.
4. Reattach the water reservoir to the machine.
5. Turn the machine on.
6. Set a large container underneath the steam wand to collect the decalcifying solution.
7. Set another container underneath the brew spout to collect more of the decalcifying solution.
8. If necessary, set your machine to dispense hot water through the steam arm and run 8oz of solution through it.
9. Run the remaining solution through the brew spouts.
10. Remove and rinse your water reservoir thoroughly.
11. Rell the water reservoir with clean water and reattach it to your machine.
12. Run the entire reservoir through the brew spouts. Rell the reservoir and run the water through the steam arm.
13. Your machine has now successfully been decalcied.