INSTRUCTIONS BOOKLET
13
English
“INTENZA+” Water Filter Installation
Remove the small white lter from the water tank and store it in a dry place.
Immerse the "INTENZA+" water lter vertically in cold water (with the open-
ing positioned upwards) and gently press its sides to let the air bubbles out.
"INTENZA+" Water Filter
We recommend that you install the “INTENZA+” water lter as this prevents
limescale build-up in your machine and preserves a more intense aroma of
your coee.
The “INTENZA+” water lter can be purchased separately.
Water is a crucial part of every coee, so it is very important to always have it
professionally ltered. Using the “INTENZA+” water lter will prevent mineral
deposits from building up and improve your water quality.
Set the “INTENZA+” water lter according to the measurements performed
(see “Measuring the water hardness”) and indicated on the base of the lter:
A = soft water – equals 1 or 2 small squares
B = hard water (standard) – equals 3 small squares
C = very hard water – equals 4 small squares
Insert the “INTENZA +” water lter in the empty water tank and push it down
to the lowest point.
Fill the water tank with running water and put it back into the machine.
Dispense all the water in the water tank by using the hot water function (see
the “Dispensing Hot Water” chapter).
Then, ll the tank again.
1 Press the MENU and the OK buttons to conrm. Scroll until selecting the
water lter. Press the OK button.
2 Select ON, then press OK and nally exit from the menu.