INSTRUCTIONS BOOKLET

23
English
Reinserting the Brew Group
1 Before reinserting the brew group into the machine, ensure the two
yellow reference indicators on the side coincide. If this is not the case,
perform the following step:
7 Switch the main power button to “1”. Press the Stand-by button.
8 Wait for the machine to perform an automatic rinse cycle.
9 Perform the “Brew Group Cleaning under Running Water” operation.
10 Remove the drip tray and the coee grounds drawer. Empty them and
insert them in the machine again.
11 Press the AROMA STRENGTH button and select pre-ground coee.
12 Press the ESPRESSO LUNGO button. The machine dispenses water from
the coee dispensing spout.
13 Repeat steps 11 and 12 twice. Throw away dispensed water.
Ensure that the lever is in contact with the brew group base.
2 Ensure that the yellow locking hook of the brew group is in the right
position.
To correctly position the hook, push it upwards to the highest position.