INSTRUCTION BOOKLET

60
Meaning of light signals
- The on/off button lights up continuously. The machine is ready for use.
1 Press the espresso button and regular coffee button simultaneously for
approximately 5 seconds.
2 Remove the drip tray, rinse it and place it back.
3 Remove the water tank and rinse it.
4 Fill the water tank with fresh tap water up to the MAX indication and slide the
water tank back into the machine.
5 Press the espresso button and brew a cup of espresso. Repeat this twice.
6 Turn the control dial to the hot water icon. Let hot water ow out of the hot
water/steam wand until the ‘water tank empty’ light lights up continuously.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the classic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water lter (if present).
11 Fill the water tank with fresh tap water up to the MAX indication and slide the
water tank back into the machine.
12 Press the on/off button to switch off the machine.
- When you switch the machine back on, it is ready for use again.
ENGLISH 60
4219-465-05501 MANUAL GAG. BESANA EN KOR.indd 60 12/02/2021 11:19:02