Operation Manual

• 21 •
English
•
6
Close the "hot water/steam" knob (3) by turning it
counter-clockwise. Remove the container.
Note: if the steam knob is opened by mistake
during the warm-up phase, the "
" light (20)
starts blinking. Close the knob and wait until the ma-
chine is ready.
4.7 Using the Machine for the First Time or
After a Period of Inactivity
This simple operation ensures an optimum brewing and must
be performed:
- at  rst start-up;
- when the machine remains inactive for a long time (more
than 2 weeks).
Dispensed water must be emptied into an ad-
equate drain. It is not suitable for food use. If
the container  lls up during the cycle, stop dispensing
water and empty the container before resuming the
operation.
A
2
Rinse the water tank and re ll it with fresh drinking
water. Insert the water tank back into its seat in the co ee
machine and make sure that it locks into place - its pro le
should adhere to that of the co ee machine.
B Turn on the machine by pressing the (11) button. Wait until
the " " light (14) turns on steady.
C
5
Place a container under the steam wand (Pannarello).
Open the knob (3) by turning it clockwise. The pump is ac-
tivated automatically.
D Dispense the whole water tank content from the steam/
hot water wand (Pannarello); to stop the dispensing pro-
cess, close the knob (3) by turning it counter-clockwise.
During this operation the pump is automatical-
ly disengaged and the "
" light (20) is blink-
ing: this is a normal behaviour of the machine. Close
the knob. Wait until the "
" light (14) is steady on
before opening the knob again.
E
2
Fill the water tank with fresh drinking water. Insert
the water tank back into its seat in the co ee machine and
make sure that it locks into place - its pro le should adhere
to that of the co ee machine.
F
13 14
Insert the  lter holder into the brew unit (4) from
the bottom and turn it from left to right until it locks into
place.
G
15
Place a suitable container under the  lter holder.
H
17
Press the " " button and dispense a cup of hot wa-
ter.
At the end of the process, stop the operation by pressing
the "
" button.
I Repeat the operations described in step (H) until the wa-
ter tank is completely empty.
L
2
Re ll the water tank with fresh drinking water.
M
19
Remove the  lter holder from the unit by turning it
from right to left and rinse it with fresh drinking water.
Now the machine is ready. Please see related chapters for oper-
ating details on how to brew co ee and dispense steam.
5 Rinsing
Note: make sure the  lter holder is inserted to
ensure a proper warm-up of the machine.
The machine is set so as to automatically rinse the co ee circuit
with fresh water every time it is turned on. This is conceived to
ensure the correct machine warm-up and an optimum co ee
aroma.
Place a container under the dispensing spout.
On newly purchased machines this function is active (the "
" light (16) is on) and is performed at the end of the warm-up
phase, when the "
" light (14) turns on steady.
Note: should no water pour from the  lter
holder, perform a manual rinse as described in
sect. 7.1.
The rinsing procedure may:
A be stopped by pressing the "
" (15) or (13) button.
B be deactivated by pressing the " " button (15) while the
" " light (14) is blinking or steady on ; in this case the "
" light (16) turns o .
Note: if the rinsing procedure is deactivated,
it can be reactivated only by pressing the "
" button.
6 Energy Saving
The machine is designed for energy saving.
After 9 minutes of inactivity, the machine turns o in order to
save energy and respect nature.
Press the ON/OFF "
" button (11) to operate the machine.