INSTRUCTIONS BOOKLET - HONG KONG

24
English
Cleaning of the Capp in Cup system under running
water
Warning: the steam tube may be hot after use.
1 Remove the Capp in Cup system from the steam tube (Fig. 23).
2 Remove the rubber handle from the steam tube. (Fig. 24).
3 Remove the Capp in Cup system spout (Fig. 25).
4 Remove the milk suction tube from the main body of the Capp in Cup system
(Fig. 26).
5 To disassemble the main body:
- hold it tight from the sides as shown (Fig. 27);
- pullandextracttheleftpartasshowningure(Fig.28);
6 Remove the rubber lid (Fig. 29).
7 Disassemble the glass milk carafe (Fig. 30).
8 Wash all components under running water.
9 After cleaning, reassemble all the components by following the same
procedure in reverse order.
Cleaning the brew group
Warning: do not wash the brew group in the dishwasher and do not use
dishwashing detergents, since they may cause the malfunctioning of the brew
groupandalterthecoffeeavour.
Removing the brew group
1 Turn off the machine and disconnect the power cord.
2 Remove the drip tray and the coffee pucks container.
3 Open the service door.
4 Press the PUSH lever (1) and pull the handle of the brew group (2) to remove it
from the machine.
2
1
4219-465-05161 MAN. GAG. MAGENTA Milk 230 HK EN Rev 02.indd 24 03/05/2021 11:45:25