ENGLISH GAGGIA MAGENTA PLUS RI8700 (SUP 051W) Operating instructions 4219-465-05151 MAN. GAG. MAGENTA Plus 230 HK EN Rev 02.
02 1 3 2 4 21 5 20 6 19 22 8 9 7 26 10 23 24 11 25 23 24 17 18 25 12 13 16 15 4219-465-05151 MAN. GAG. MAGENTA Plus 230 HK EN Rev 02.
First installation 03 04 1 05 06 07 Confermi di voler cambiare la lingua in Italiano? 2 08 09 13 14 10 11 12 15 16 17 In the next steps we will set the correct water hardness level 18 1 sec. 1 min. 19 4219-465-05151 MAN. GAG. MAGENTA Plus 230 HK EN Rev 02.
English Important safety information This machine is equipped with safety features. Nevertheless, read and follow the safety instructions carefully and only use the machine as described in these instructions, to avoid accidental injury or damage due to improper use of the machine. Keep this safety booklet for future reference. Warning General - Check if the voltage indicated on the machine corresponds to the local mains voltage before you connect the appliance.
English 5 Caution General - This machine is intended for normal household use only. It is not intended for use in environments such as staff kitchens of shops, offices, farms or other work environments. - Always put the machine on a flat and stable surface. Keep it in upright position, also during transport. - Do not place the machine on a hotplate or directly next to a hot oven, heater or similar source of heat. - Only put roasted coffee beans in the bean hopper.
English Caution - Make sure that the milk carafe is installed and the milk dispensing spout is open before you select a milk-based coffee beverage or milk froth. - Do not put any other liquids in the milk jug/carafe than water (for cleaning) or milk. - Do not clean the milk carafe in the dishwasher. Machines with classic milk frother / pannarello Warning - To avoid the danger of burns, be aware that dispensing may be preceded by small jets of hot water.
English 7 Electromagnetic fields (EMF) This machine complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Recycling - This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU). - Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.
Congratulations on your purchase of Gaggia Magenta! This easy-to-use machine guarantees excellent results every day. Thanks to the intuitive interface, you can choose among 5 beverages and customise them according to your preferences. Before being packed, each of our high-quality machines undergoes rigorous testing in our laboratories in order to ensure its correct operation. Some coffee residue might be found in your machine, since real coffee is normally used during testing.
English 9 Contents Machine overview (Fig.2) Steam wand version Classic pannarello version 10 ..............................................................................................................................................................................................................................................................................................................................................................................................................................
English Machine overview (Fig.
English 11 Control panel and display 01 1 STEAM Control panel overview (Fig. 1) 1/2 3 MULTIFUNCTION buttons ON/OFF To switch the machine on or off, by keeping the button pressed for a few seconds. button ON/OFF 4 5 HOME HOME To open the beverage menu. button CLEAN/SET Select the function shown on the display. button To open the cleaning and settings menu.
English 12 First installation 15 cm 15 cm 15 cm 15 cm Before using the machine, it is essential to follow a few simple steps, clearly described in the explanatory drawings you found in the quick guide at the beginning of this instruction manual. Note: for even tastier coffee, we recommend that you initially prepare 5 cups of coffee to allow the machine to self-adjust.
English 13 Measuring water hardness You will need to set the water hardness when you install your machine. Take the water hardness measuring strip contained in the packaging and follow the steps shown on the display during the installation phase. To change the water hardness later, press the CLEAN/SET button, then select " SETTINGS ", and once in the settings menu, please select " WATER HARDNESS ". clean/setting 1 sec. 1 Immerse the water hardness measuring strip in a glass of water for 1 second.
English Installing the INTENZA+ water filter Immerse the INTENZA+ water filter in cold water, in a vertical position and with the opening facing upwards. Press both sides of the filter gently to let air bubbles out. Remove the INTENZA+ water filter from the water. Set the machine according to the detected water hardness - see the “Measuring water hardness” chapter.
English 15 Types of beverage Original recipe Description Espresso Coffee 40 ml Espresso lungo Coffee 80 ml Coffee Coffee 120 ml Americano Coffee 40 ml Water 110 ml Water 150 ml Hot water The espresso is known around the globe as true Italian coffee. Served in a small cup, its unmistakeable features are a full and intense aroma and a top layer of compact, natural “crema”. It is the result of the pressurized hot water extraction process invented by Achille Gaggia in 1938.
English Espresso tray This machine was designed to guarantee flawless results, from a traditional espresso to a number of different beverages. If you want to enjoy an Italian espresso with a delicious layer of its natural “crema” on top and as tradition dictates, we suggest your using of the "Espresso Tray" which is specifically designed for this purpose. This tray allows the use of traditional espresso cups, ensuring the perfect height for a compact, homogeneous “crema” and a splash-free brewing.
English 4 Finally, press the START/STOP START/STOP 17 button to start brewing. Note: you can interrupt the brewing at any time by pressing the START/STOP button. START/STOP If you wish to customise the settings of a specific beverage, please refer to the “Beverage customisation” chapter. Brewing coffee using pre-ground coffee Use the measuring scoop provided to insert the correct dose in the pre-ground coffee compartment.
English How to froth milk Tip: use cold milk (at a temperature of around 5 °C) with a protein content of at least 3% to ensure optimum results for the froth. You can use either whole milk or semi-skimmed milk. You can also use skimmed milk, soy milk or lactose-free milk. Model with the classic pannarello 1 Fill 1/3 of a jug with milk 2 Press the HOME 3 Insert the classic pannarello into the milk. From the beverage selection menu, select STEAM " and press the START/STOP button to start frothing.
English 4 19 Press the HOME button to open the beverage menu. Select " STEAM " and HOME press the START/STOP button to start frothing START/STOP STEAM 5 To froth the milk correctly, the steam nozzle must always be in contact with the milk and not with the froth. Therefore, as the layer of froth increases, the jug must be slightly raised trying to keep the nozzle in contact with the milk, without touching the bottom of the jug.
English Customising beverages and saving settings (MEMO) This machine allows you to change the settings of a beverage according to your preferences and save them (MEMO), by overwriting the previous settings. Beverage Customisation ESPRESSO 1 Press the HOME 2 Select your beverage. 3 All the settings that can be adjusted and/or selected are displayed on the screen. Based on the type of beverage, you can adjust and/or select: HOME button.
English 9 21 Once the beverage has been customised according to your preferences, you can proceed with dispensing it by pressing START/STOP button. START/STOP 10 If you have changed any of the parameters listed above, you will be asked at the end of dispensing if you would like to save the recipe with the changes made. Note: the new saved settings will overwrite those of the previous recipe.
English Cleaning and maintenance Regular cleaning and maintenance keep the machine in perfect condition and ensure perfect coffee flavour, a constant coffee flow and an excellent milk froth. Please refer to the following table to know when and how to clean the removable parts of the machine. Please read the specific chapter for further information.
English 23 Part description When to clean How to clean Espresso tray Depending on usage Remove the espresso tray and clean it with running water. You can also dishwash it in the upper tray. Cleaning the steam system Cleaning the classic pannarello 1 Remove the classic pannarello and the rubber handle from the steam tube and rinse them under running water. 2 Clean the steam tube with a damp cloth. 3 Reassemble the parts. Cleaning the steam wand 1 Clean the steam wand with a damp cloth.
English 24 Cleaning the brew group Warning: do not wash the brew group in the dishwasher and do not use dishwashing detergents, since they may cause the malfunctioning of the brew group and alter the coffee flavour. Removing the brew group 1 Turn off the machine and disconnect the power cord. 2 Remove the drip tray and the coffee pucks container. 3 Open the service door. 4 Press the PUSH lever (1) and pull the handle of the brew group (2) to remove it from the machine.
English 25 Reinserting the brew group 1 Before placing the brew group back into the machine, make sure that the two yellow reference marks on the side match. If this is not the case, perform the following step: Make sure that the lever is in contact with the base of the brew group. 2 Make sure that the yellow locking hook of the brew group is in the right position. To position the hook correctly, push it upwards to the highest possible position.
English Cleaning the brew group with cleaning tablets for the removal of oily coffee residues Warning: use only Gaggia cleaning tablets to remove oily coffee residues. CLEAN BREW GROUP 1 Place a container under the coffee dispensing spout. 2 Press the CLEAN/SET the display. 3 DESCALING button and select the " CLEAN " button shown on clean/setting Select "BREW GROUP CLEANING" and press the " START/STOP to start the cleaning procedure.
English 4 Apply a thin layer of lubricant to the guides, on both sides (see figure). 5 Reinsert the brew group - see the “Reinserting the brew group” chapter. 27 Note: you can use the lubricant tube multiple times. Descaling Descaling procedure Descaling needs to be carried out when the machine requires it. Use only Gaggia descaling solution designed to guarantee the machine’s excellent performance. The use of different products could damage the machine and leave residue in the water.
English 5 Pour the entire bottle of Gaggia descaling solution into the water tank and fill the tank with water up to the CALC CLEAN level. Reinsert it into the machine. 6 Place a large recipient (1.5l) under the steam tube and the coffee dispensing spout. 7 Follow the instructions shown on the display to launch the descaling procedure. This procedure lasts approximately 25 minutes and consists of a descaling cycle and a rinse cycle, carried out with dispensing at regular intervals.
English 29 Other settings By pressing the CLEAN/SET button and selecting “ SETTINGS ” on the display, you can reset or modify some of the machine parameters including: clean/setting -- Language. -- Water filter. -- Stand-by Time. -- Units. -- Water hardness. -- Beverage counter. -- Button sound -- Factory settings. Language When the language setting icon is selected, the list of available languages will be displayed.
English Units SETTING UNITS WATER HARDNESS BEVERAGE COUNTER BUTTON SOUND By selecting “UNITS”: you can set the unit of measurement in "ml" or "oz". Water hardness With “WATER HARDNESS” selected, follow the instructions on the display and those described under the “Measuring water hardness” chapter. Beverage counter It is possible to display the number of cups of each beverage that have been dispensed since the first operation of the machine. These data cannot be reset.
English 31 Error code key xx The list below reports the error codes that the display can show, their meanings and how to solve the problem. If the indicated solutions are ineffective because the display continues to show the error code icon and the machine does not return to normal operation, or if other error codes are displayed, you must contact an authorized service center or distributors in your country. The contact info is listed on www.gaggia.com and www.gaggia.it.
English Troubleshooting This chapter outlines the most common problems you may encounter while using the machine. If you are unable to solve the problem using the information provided below, visit the FAQ sections on www.gaggia.com or www.gaggia.it or contact the either the Customer Service Centre or the local distributors in your country. Problem The machine does not switch on. Cause The machine is not connected. Solution Check that the power cord has been inserted correctly.
English Problem The brew group cannot be inserted. 33 Cause Solution The brew group is not in the correct The brew group has not been positioned position. correctly before being placed back. Ensure that the lever is in contact with the base of the brew group and that the hook of the brew group is in its correct position. See the “Reinserting the brew group” chapter. To reset the machine put the drip tray with the coffee pucks container back in place. Do not insert the brew group.
English Problem The “INTENZA+” filter cannot be inserted. Cause Remove the air from the filter. Solution Let the air bubbles out of the filter. The tank still contains some water. Empty the water tank before installing the filter. The rubber seal is not inserted onto Check the packaging and insert the seal onto the “INTENZA+” filter. the “INTENZA+” filter. You can not activate the Another filter is already active “INTENZA+” filter. The machine indicates the filter usage in percentage.
English 35 Technical specifications Nominal voltage - Power rating Power supply See data plate on the inside of the service door Housing material Thermoplastic type Dimensions 224 x 357 x 435 mm Weight 7,6 kg Power cord length 1200 mm Control panel Front panel Water tank 1.8 litres - Removable type Coffee bean container capacity 250 g Coffee pucks container capacity 15 Pump pressure 15 bar Boiler Stainless steel boiler Safety devices Thermal Fuse 4219-465-05151 MAN. GAG.
COD. - Rev.02 - 03/05/21 GAGGIA S.p.A. reserves the right to make any necessary modification. GAGGIA S.p.A. Sede Amministrativa/Administrative Office Via Torretta, 240 40041 Gaggio Montano - Bologna - Italia +39 0534 771111 / Fax +39 0534 31025 Capitale Sociale Euro 104.000 i.v. REA MI1387376 - R.I. Cod.Fisc. 02069680367 Part. IVA : IT-13054780153 www.gaggia.it www.gaggia.com 4219-465-05151 MAN. GAG. MAGENTA Plus 230 HK EN Rev 02.