INSTRUCTIONS BOOKLET - HONG KONG

13
English
Measuring water hardness
You will need to set the water hardness when you install your machine.
Take the water hardness measuring strip contained in the packaging and follow
the steps shown on the display during the installation phase. To change the water
hardness later, press the CLEAN/SET
clean/setting
button, then select " SETTINGS ", and
once in the settings menu, please select " WATER HARDNESS ".
1 Immerse the water hardness measuring strip in a glass of water for 1 second.
Remove the strip from the water and wait 1 minute.
2 Note how many squares turn red.
3 Use the green " " and " " buttons to select the water hardness according
tothetablebelow.Conrmthesettingbypressing" ".
Small red
squares
Value to set Water hardness INTENZA+
1 very soft water A
2 soft water A
3 hard water B
4 very hard water C
INTENZA+ water lter
WerecommendusingtheINTENZA+waterltertolimitlimescaleformation.This
ensures a longer operating life of your machine and a better coffee aroma over
time.
Water is an essential element in brewing coffee. Therefore, it is extremely
importantthatwaterisalwayslteredadequately.
TheINTENZA+waterlterpreventstheformationofmineraldeposits,improving
the quality of the water.
1 sec.
4219-465-05151 MAN. GAG. MAGENTA Plus 230 HK EN Rev 02.indd 13 03/05/2021 11:31:00