INSTRUCTIONS BOOKLET - HONG KONG

14
English
Installing the INTENZA+ water lter
ImmersetheINTENZA+waterlterincoldwater,inaverticalpositionandwiththe
openingfacingupwards.Pressbothsidesoftheltergentlytoletairbubblesout.
PlacetheINTENZA+lterinthewatertank,ensuringitiscorrectlypositioned.Rell
the water tank and place it back in its housing.
1 Press the CLEAN/SET
clean/setting
button and then the " SETTINGS " button.
2 Select " WATER FILTER " and press the " " button.
3 Select " ACTIVATE " and follow the instructions on the display to activate the
ltercorrectly.
Note:youcanpausethelteractivationprocedurebypressingtheSTART/STOP
START/STOP
button.Toresumethelteractivationprocedure,presstheSTART/STOP
START/STOP
button again.
RemovetheINTENZA+waterlterfromthewater.Setthemachineaccordingto
the detected water hardness - see the “Measuring water hardness” chapter. On the
lterbase,pleasesetoneofthefollowing:
A = soft water – 1 or 2 small squares
B = hard water (standard) – 3 small squares
C = very hard water – 4 small squares
Replacing the INTENZA+ water lter
WhentheINTENZA+waterlterexpires,thewarningmessageappearsonthe
display.
1 Replacement or deactivation can be executed by pressing the CLEAN/SET
clean/setting
button and then the " SETTINGS " button.
2 Select " WATER FILTER ” then press the " " button.
3 Select "REPLACE"tochangethelteror"DISABLE"ifyoudonotintendtouse
thelter.Conrmwiththe" " button.
Followtheinstructionsshownonthedisplaytoactivatethelter.
4219-465-05151 MAN. GAG. MAGENTA Plus 230 HK EN Rev 02.indd 14 03/05/2021 11:31:02