Operating instructions

ENGLISH

• 4 •

HOW TO OPERATE

1. Fill the mill beaker (fig. 2)

Do not fill higher than two or

three millimeters below the

rim. You may use the cover

for this purpose.

A maximum filling results in

a quantity of ground coffee

which is enough for about 10

cups.

2. Place the cover (fig. 3)

3. Insert the main plug into a wall socket.

4. Holding the coffee mill with both hands, press and hold switch (B) (fig. 4)

With a maximum filling the

operation takes about 30

seconds.

The longer you continue the

operation, the finer the results

will be.

Note:

do not over-

process!

5. Release switch (B)

6. Remove the main plug from the wall-socket.

7. Tap the cover to remove ground coffee sticking to it (fig. 5). Then open the coffee mill (fig. 6).

CORD STORAGE

You can store excess main cord

by winding around the bottom of

the main unit (Fig. 7).

CLEANING

First unplug the appliance.

Clean the appliance after every use. Never use caustic or abrasive cleaning agents.

The motor base can be wiped clean with a damp cloth.

NEVER SUBMERGE THE MOTOR BASE UNDER WATER OR ANY OTHER LIQUID.