User's Manual

11
Chapter 6 FAQ
The followings are some common questions that our customers have frequently asked
with answers provided.
Q1: Why does the relay not actuate when I operate a function on the transmitter?
A1: If the relay does not actuate, this can be due to one of the following causes:
1. The button paddle may be faulty or the buttons are jammed
2. Incorrect coding.
3. External interference.
4. No power to the receiver
5. Is the emergency stop on the transmitter and or the equipment being operated
released.
Q2: The equipment operates intermittently?
A2: The most likely reason for the intermittent operation is due to interference from
other equipments or other devices using the same frequency.
Q3: Why has the range become shorter?
A3: This problem can be due to antenna or its cables being damaged or incorrectly
installed.
Q4: What should I do if the transmitter does not start up?
A4: If the transmitter does not start up when you press the start button, and the LED
glows red, start by checking the following yourself:
1. That the key switch is not in the OFF position
2. That the emergency stop button is not depressed.
3. The start button on the transmitter is defective.
4. Button paddle is faulty or motion buttons are jammed.