User's Manual

GS1011MEES
Data Sheet Sheet of 14 Sep 29, 2011
Proprietary Information and Specifications are Subject to Change
2
INTRODUCTION
This document describes a simple method for characterizing GS1011MEES WLAN module based
RF parameters, such as transmitted spectra and receiver sensitivity. It will be described step by step
below that how to control and setup.
Step 1 : Extract to CDM20814_WHQL_Certified.zip, it is a USB to UART driver, then setup it.
Step 2 : Setup teraterm_utf8-4.58.exe
program, this program can help to send command to module.
Step 3 : Double click UTF-8 execute file as shown below, it will occur after completing step2 install.
Figure 1
Step 4 : When implement UTF-8, selecting Serial port correctly.
Figure 2