User's Manual

Problem: After installation and restarting, Windows 95 informs me that display

setting is still incorrect. What can I do?

There may be conflict between previous and current display drivers.

This is caused by not complete removal of previous display driver. Try

the following steps to remove it:

Solution:

(1) Use right button of mouse to click on "My Computer" icon on desktop.

(2) Select "Properties" and "System Properties" box appears

(3) Click on "Device Manager" tab

(4) You will see a list of devices on your computer.

(5) Open "Display adapters" in the list (double click it).

(6) You will find two (or more) conflicted adapters listed here.

(7) Remove all previous adapters by selecting them and press "Remove"

(8) Close Device Manager and restart Windows 95.

(9) Now display driver will work correctly.

Problem: After installing the driver, Windows 95 doesn't prompt me for restarting

and the driver still doesn't work after I reboot it by myself.

You may have installed similar drivers before. Try the following steps to

install:

Solution:

(1) Use right button of mouse to click on "My Computer" icon on desktop.

(2) Select "Properties" and "System Properties" box appears

(3) Click on "Device Manager" tab

(4) You will see a list of devices on your computer.

(5) If "Display adapters" appears in the list, click it.

If "Display adapters" doesn't appear, jump to step 9 and continue.

(6) The name of your card will be listed in the box. Double click it.

(7) The properties box of your card appears. Select "Driver" tab.

(8) Click "Change Driver.." and follow the installation steps.

(9) Click "Other devices" you will see your card is listed.

(10) Click on the name of card, the properties box appears.

Select "Driver" tab.

(11) Click "Change Driver.." and follow the installation steps.

Problem: When the system is starting up, there is a series of prolonged beeps.

Solution:

The VGA card may not be firmly inserted into the expansion slot. Ensure that the gold-

striped bus connector of the graphics card is properly inserted into the expansion slot.

Ensure this by pressing the card gently and evenly into the slot. Alternatively, remove the

card and re-insert it.

Trouble Shooting