Figure 5-4 Figure 5-5 (As Figure 5-4) DeskTop: Displays the current Resolution Setting, Color Setting, Font Size and Refresh Rate for the monitor. Drag the slider to specify values for each setting and click OK to put changes into effect. (As Figure 5-5) Information: Displays the current display settings and information of your computer. Run this program each time Windows starts - check box: Select this option to run Expertool immediately each time Windows starts.
Screen Adjustment: Selects Adjust to adjust the screen position with the keyboard. If you wish to cancel any changes you’ve made, select Default. Monitor Information: Shows information about your monitor. Hide modes that this monitor cannot display: Unchecking this box will allow you to set your display to modes that this monitor cannot display correctly. This may lead to an unusable display and/or damaged hardware.
Chapter 6 Technical Information will affect the stability of the VGA card. It is recommended that you use the original setting. (As Figure 5-9) DirectX: DirectX properties vary depending on the version of windows you are running, the version of DirectX installed, and the type of DirectX enabled drivers installed. This dialog box will also display the system's DirectX capabilities, and related information.
640x480 800x600 1024x768 1152x864 1280x960 1280x1024 1600x900 1600x1200 120Hz 120Hz 120Hz 100Hz 85Hz 85Hz 100Hz 75Hz 120Hz 120Hz 120Hz 100Hz 85Hz 85Hz 100Hz 75Hz Monitor Connector Pin Assignments Pin no. 1 2 3 4 5 6 7 8 Function Pin no.
DVI Connector Pin Assignments and Description Pin no.
(hex) 100h 101h 102h 103h 104h 105h 106h 107h 108h 109h 10a 10b 10c 10e 10f 111 112 114 115 117 118 11a 130 131 132 133 134 135 136 13d 13e 145 146 640 by 400 640 by 480 800 by 600 800 by 600 1024 by 768 1024 by 768 1280 by 1024 1280 by 1024 80 by 60 132 by 25 132 by 43 132 by 50 132 by 60 320 by 200 320 by 200 640 by 480 640 by 480 800 by 600 800 by 600 1024 by 768 1024 by 768 1280 by 1024 320 by 200 320 by 400 320 by 400 320 by 400 320 by 240 320 by 240 320 by 240 640 by 400 640 by 400 1600 by 1200 1600
Width 640 640 640 800 800 800 1024 1024 1024 1152 1152 1152 1280 1280 1280 1280 1280 1280 1600 1600 1600 1600 1600 1600 Height Color 480 480 480 600 600 600 768 768 768 864 864 864 960 960 960 1024 1024 1024 900 900 900 1200 1200 1200 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit 8-bit 16-bit 32-bit Memory Configuration 16MB 32MB V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V
Chapter 7 Trouble Shooting Problem: After installation and restarting, Windows 95 informs me that display settings are still incorrect. There may be conflict between previous and current display drivers. This is caused by incomplete removal of previous display driver. Try the following steps to remove it. Solution: (1) Use the right mouse button to click on the "My Computer" icon on your desktop. (2) Select "Properties" and the "System Properties" box should appear. (3) Click on the "Device Manager" tab.
remove the card and re-insert it. Problem: Monitor display flickers after Windows 95 or Windows 98 starts. Solution: Your monitor may not support the resolution or refresh rate that you have set. You must use display settings supported by the monitor. To change the display settings: (1) Restart your system in Windows 95/Windows 98 Safe mode. To do so: a. Restart your system and when the message "Starting Windows 95/98…" appears, press F8.
When you need advanced technique service, please Complete this form and FAX to your dealer. Your name: Product S/N: Mainboard Memory: Mainboard Brand: Cache Memory: Monitor Type: Phone : PCB NO.: MB KB VGA Memory MB VGA Memory Brand: FDD/HDC Card: Horizontal Freq. : KHz to KHz Vertical Freq.