User's Manual

Chapter1Basics

4
• Upon successful connection to PC, turn to the
MDX01B, on the status bar, flick upwards to
display an ongoing list.
• Select “USB connected”, then tap on “Turn on
USB storage” to enter USB mode and all operation
will be halted.
• Go to [My Computer], double click on the device’s
disk to open.
• Perform normal file management operation like
other USB device.
From memory card
This unit supports Micro SD card up to 32 GB
To insert a Memory card
Insert the card correctly with the contact pin facing
downwards as
illustrated below.
Pushing the card
into the memory
card slot, then you
should hear a
click when the
card is seated
correctly. You
may damage the
card and the
device if Micro SD card is not inserted correctly.
To remove Micro SD card, push the card once again
until it clicks.
When a Micro SD card is inserted in or ejected from
the device, it may take few seconds for the device to
update the content. Please avoid inserting or ejecting