ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCTIVO DE ARMADO FG-DI-PU-19-777-USA Update 21 Feb 2023
NOTES ON ASSEMBLY / NOTES POUR L’ASSEMBLAGE / NOTAS SOBRE EL ENSAMBLE • • • • To ensure ease of assembly read all instructions before assembly and follow step by step illustrations. Keep instructions for future use. Adult assembly required. 2 person required. Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete.
WARNING AVERTISSEMENT / ADVERTENCIA Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: • Place heaviest items in the lowest drawers. • Do not set TVs or other heavy objects on the top of this product. Never allow children to climb or hang on drawers, doors, or shelves. • Never open more than one drawer at a time.
MINIFIX CAM & MINIFIX BOLT CAMÉRA MINIFIX & BOULON MINIFIX CÁMARA MINIFIX & PERNO MINIFIX MINIFIX BOLT BOULON MINIFIX PERNO MINIFIX NO GAP PAS D'ÉCART NINGÚN ESPACIO MINIFIX CAM CAMÉRA MINIFIX CÁMARA MINIFIX
SPECIAL TIPS FOR DOOR ALIGNMENT CONSEJOS ESPECIALES PARA LA ALINEACIÓN DE PUERTAS CONSEILS SPÉCIAUX POUR L'ALIGNEMENT DES PORTES A.
HARDWARE QUINCAILLERIE / HERRAJE (A) Minifix Bolt EU 24 (D) Screw M3.5 x 15mm (B) Screw M4 x 20mm (E) Nail Pin 3/4” 21 units Minifix Cam 15/9.5 (J) Hinges 7/8” (K) 4 units • (F) Dowel M8 x 30mm 16 + 2 units 16 units (H) 21 units • • Screw #10 x 1/2” 2 units 6 units (G) (C) 19 + 2 units PVC L Bracket (I) Cosmo Handle 1 unit Shelf Support (L) 2 units Door Stopper 4 units 1 unit Hardware quantity may supplied more than it required. Please keep spares and tools for future use.
STEP 1 Dx1 Hx1 Dx1 Fx2 STEP 2
STEP 3 Ax5 STEP 4 Fx2
STEP 5 Gx3 STEP 6 Fx2
STEP 7 Gx2 STEP 8 Ax5
STEP 9 Fx4 STEP 10 Gx5
STEP 11 Ax4 STEP 12 Fx2 90
STEP 13 Gx4 STEP 14 Ax2
STEP 15 Fx1 STEP 16 Gx2
STEP 17 Ax5 STEP 18 Fx6 90
STEP 19 Gx5 STEP 20 E x 16 1 2
STEP 21 Dx4
FURNITURE TIPPING RESTRAINT SEGURO CONTRA VOLCADO DE MUEBLES DISPOSITIF DÉ SÉCURITÉ POUR MEUBLES STEP 22 1 Locate a wall stud: - Move the furniture unit to its final position to the wall - Locate a wall stud behind the furniture unit 2 Position Mark: - Use the Pencil to mark the positioning hole on a wall stud
AA x 1 3 Screw the safety bracket to the wall stud: - Screw the safety bracket (AA) to the wall stud with Screw (DD) 5 Screw the safety bracket to the furniture - Screw the safety bracket to the bottom Top Furniture with Flat Washer (BB) and Screw (CC) BB x 1 CC x 1 DD x 1 4 Move the furniture to the wall stud - Move the furniture to the wall stud and make sure the safety bracket in the hole
STEP 23 Kx4 too ltip STEP 24 Lx1
STEP 25 Jx4 Cx8 STEP 26 Cx8 A A.Lateral adjustment by screw adjusting B B.Vertical adjustment via slot in the mounting plate C C.
STEP 27 Ix2 Bx2
MAXIMUM LOADS CHARGES MAXIMALES / CARGA MAXIMA 18 lbs 8 kg 13 lbs 6 kg 13 lbs 6 kg This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. Ce meuble a été conç pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. Esta unidad ha sido diseñada para soportar la carga máxima anotada.
