User's Guide

16
NS-OTR16SS9 REV B
www.insigniaproducts.com
3 Pull the louver away from the unit.
Louver
4 Open the light cover located behind the filter by removing the light cover screw, then carefully pulling up on the
front edge.
Light cover screw
Light cover
5 Remove the old light bulb, then replace with a new bulb.
•
CAUTION
Do not use a bulb larger than 30 watts.
6 R
eplace the microwave light cover by carefully pushing it into place.
7 Push the louver back into place and replace the louver mounting screws.
Louver
NS-OTR16SS9 REV B_20-0410_MAN_V1_EN.fm Page 16 Thursday, December 10, 2020 9:36 AM