Installation Instructions

9
AUTO COOK/TIME/WEIGHT dial to extend or shorten the cooking time while the sign COOK is twinkling
KEEP WARM
1. In standby mode, press KEEP WARM pads once
2. Turn AUTO COOK/TIME/WEIGHT dial to enter desired time.
3. Press START/+30SEC pad to confirm.
SETTING THE TIMER
The countdown longest time is 95 minutes
1. Press KITCHEN TIMER pad once.
2. Turn AUTO COOK/TIME/WEIGHT dial to enter time. The longest time you can set is 95 minutes.
3. Press START/+30SEC pad to confirm.
NOTE:
1. If you want to cancel the timer, press KITCHEN TIMER pad, during the display showing the time,
press STOP/CANCEL pad.
2. When the countdown ends, the buzzer will beep to remind you.
3. During sensor cooking, the timer program cannot be set and check.
TIME DEFROST
The longest defrosting time is 95 minutes
1. Touch TIME DEFROST pad once.
2. Enter desired defrosting time by turning AUTO COOK/TIME/WEIGHT dial.
3. Touch START/+30SEC pad.
NOTE: During defrost, the oven will pause and sound beep to remind user to turn the food over and then
press START/+30SEC pad to resume.
WEIGHT DEFROST
The oven could be used to defrost food on the weight you entered. The defrosting time and power level
are automatically set once the weight is programmed.
FOR EXAMPLE: Suppose you want to defrost food.
1. In standby mode, press WEIGHT DEFROST pad once.
2. Enter weight by turning AUTO COOK/TIME/WEIGHT dial. The maximum weight is 6 LB.
3. Press START/+30SEC pad.
NOTE: During defrosting process, the system will pause and sound to remind user to turn food over, after
that, press START/+30SEC to resume.
MULTIPLE COOKING
Your oven can be programmed for up to 3 automatic cooking sequences.
Suppose you want to set the following cooking program.
Microwave-cooking
Microwave-cooking (with lower power level)
1. In standby mode, input microwave-cooking program without press START/+30SEC.
2. Input another microwave-cooking program with probably lower power level settings.
3. Touch START/+30SEC pad.
NOTE: Weight defrost, Time defrost, Sensor cooking menus and Auto cook menus cannot be set in
multiple cooking program.