Installation Guide

GAS CONVERSION
GAS CONVERSION
21
a
A
Opening in grate for
wok ring (provided) is
located over left front
burner.
A
Regulator Cap
A
Retainer Pin
A
Wrench
7 mm Nut Driver
Safety Glasses
Small Flat-head Screwdriver
Tools Needed for Conversion:
IMPORTANT: Disconnect all electrical power, at the main
circuit breaker or fuse box. Shut off the gas supply to the range
by closing the manual shut-off valve.
Unscrew the regulator cap with the wrench.
1.
Remove the retainer pin that is currently positioned for use
with Natural Gas.
2.
STEP 1 - ADJUST THE REGULATOR
A
A