Installation Guide

Thank you for purchasing a Galanz product. Please read this manual carefully for correct usage and safety,
and keep for future reference. For service, support and warranty information, call 800-562-0738.
FPO
INSTALLATION REQUIREMENTS
INSTALLATION REQUIREMENTS
©2019 Galanz Americas Limited Company
nce,
using
rom
ted
ore
e
e
n it is
at
e for
cturing
ng.
moke
4
Gather the required tools and parts before starting installation. Read
and follow the instructions provided with any tools listed here.
Tape measure
Flat-blade screwdriver
Phillips screwdriver
Level
Cordless electric Drill
Hammer
Wrench or pliers
Pipe wrench
10" Adjustable Wrenches (2)
⁄" nut driver
¼" nut driver
½" Combination wrench 7mm nut driver
7 mm combination wrench
⁄" (3.2 mm) drill bit (for wood
floors)
⁄" carbide-tipped masonry drill
bit (for concrete/ceramic floors)
Marker or pencil
Noncorrosive leak-detection s
olution
Masking tape
Pipe-joint compound resistant to
LP gas
16 x 1⁄ " Screws (2)
Anti-tip Bracket
TOOLS AND PARTS
PARTS NEEDED
Check that all parts are included.
Check local codes and consult gas supplier. Check existing gas
supply and electrical supply. See “Electrical Requirements” and
“Gas Supply Requirements” sections.
NOTE: The Anti - tip bracket must be securely mounted to the
subfloor. Depending on the thickness of the flooring, longer
screws may be required to anchor the anti-tip bracket to the
subfloor. Longer screws are available from your local hardware
store.
PARTS SUPPLIED
For LP/Natural Gas Conversions
TOOLS NEEDED
A
A
B
C
D
E
B
Regulator
Gas Pipe Adapter
with Washer
C
LP/Natural Gas
Conversion Kit
E
D