User Manual

Thank you for purchasing a Galanz product. Please read this manual carefully for correct usage and safety,
and keep for future reference. For service, support and warranty information, call 800-562-0738.
FPO
COOKTOP USE
9
COOKTOP USE
COOKTOP USE
TIME OF DAY
When the power is connected, the screen displays 12:00 and
the bar above “Set Clock.”
To set the correct time, press the up arrow or down arrow until
the correct time is displayed. After 5 seconds, the clock will
start automatically, or you can press the function button to
select manual operation.
Timer
Set
Cook
Time
End
Time
Set
Clock
a b c
a. Decrease Time
b. Function
c. Increase Time
SET THE TIMER
The digital countdown timer can be set up to 12 hours and 59
minutes maximum.
To set the timer, press the function button repeatedly until the
bar above Timer Set is displayed. Once the function button is
released, the current time is displayed and the bar above Timer
Set flashes. When the function button is pressed the remaining
time is displayed. When the set time is reached, Timer Set
disappears and the alarm will ring. To stop the alarm, press any
button.
NOTE: After pressing the function button, you must set the
timer within 5 seconds.
Read the instructions before installing or using this appliance.
1. This appliance shall be installed in accordance with the
regulations in force and only used in a well-ventilated space.
2. The use of a gas-cooking appliance results in the production
of heat and moisture in the room in which it is installed.
Ensure that the kitchen is well ventilated: keep natural
ventilation holes open or install a mechanical ventilation
device (mechanical extractor hood).
3. Prolonged intensive use of the appliance may call for
additional ventilation, for example opening of a window, or
more effective ventilation, for example, increasing the level
of mechanical ventilation where present.
IGNITION AND OPERATION OF THE
BURNERS
In order to ignite a burner, push down on the knob while
rotating it counterclockwise, until the knob indicator is
aligned with the ignite icon .
To turn off the burner, rotate the knob clockwise until the
indicator on the knob is aligned with OFF.
For models with a safety valve - Once the flame is lit, hold the
knob depressed for about 3-4 seconds until the device keeps
the burner automatically lit. If the burner fails to ignite, wait
one minute for the gas to dissipate before attempting to
reignite. Adjust the flame intensity by rotating the knob
counterclockwise from MAX (maximum) to MIN (minimum).