Use and Care Manual

4
(a) Do not attempt to operate this oven with the door open since open-door operation can result in
harmful exposure to microwave energy. It is important not to defeat or tamper with the safety
interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner
residue to accumulate on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is particularly important that the oven door close
properly and that there is no damage to the:
① Door (bent),
② Hinges and latches (broken or loosened),
③ Door seals and sealing surfaces.
(d)
The oven should not be adjusted or repaired by anyone except properly qualified service
personnel.
Unpacking and Examining Your Oven
Carefully remove oven from carton. SAVE THE CARTON AS IT MAY MAKE INSTALLATION EASIER.
Remove:
1. All packing materials from inside the oven cavity; however, DO NOT REMOVE THE WAVEGUIDE
COVER, which is located on the ceiling in the oven cavity. Check to see that there are Installation
Instructions, Wall Template, Top Cabinet Template, bag of Installation Hardware, Charcoal Filter
and Exhaust Damper Assembly. Read enclosures and SAVE the Owner’s Instructions.
2. The feature sticker from the outside of the door, if there is one.
Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing
surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is
any damage, do not operate the oven and contact your dealer.
See Installation Instruction for more details.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE ENERGY
UNPACKING INSTRUCTIONS