Warranty Guide

Installing door handles
Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738
Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738
Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738 Refrigerator GLR40TBKER/GLR40TRDER Use and Care Manual Support:800-562-0738
Important notice: Please keep this appliance standing upright
during transportation. If the unit must be laid on its side at any time,
please stand the appliance upright for at least 4 hours before using.
For all consumer questions or inquiries, contact our please U.S.
800-562-0738 .
customer service line at
Compact Refrigerator
SAVE THIS INFORMATION FOR FUTURE REFERENCE
1
2
3
5
8
10
7
GLR40T**ER
Model No.:
800-562-0738
528429
9
11
12
80
84x118.8mm
4.Crisper glass cover
5.Vegetable crisper
6.Rod
7.Lamp switch
8.Bottle guard
3.Shelf
2.Lamp and temperature control knob
1.Freezer Room
1.4
2.6
0.93
1
R600a/0.99 oz
73.9 lbs
21.61
42.78
19.13
kw.h/24h
4
6
INSTALL THE HANDLES
2.Prepare a cross screwdriver.
3.Remove the screw hole sealing tape on the door.
4.Make sure the three screw holes in the shake hands are aligned
with those in the door, and then respectively screw them together.
The right side one is suggested to be preferred to be screwed down.
1.
handle covers, and six screws.
Take out accessory from packing bags: two handles, two shake
Handle Base
Handle Cover
Screw
Socket Head Wrench
Sealing tape
5.Install handle cover on the handle.
Tips for the Steps to Install:
(1) Buckle the handle on the left side first.
(2) Buckle the handle on the left side.
(3) Buckle the middle part of the handle tightly in the end. And
a click can be heard if the handle is properly installed.
1
2
3
4
5
6
7
8

Summary of content (1 pages)