Microwave Oven Instructions Model: P180M18ASL-A0 Please read these instructions carefully before installing and operating the oven.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY 1. Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. 2. Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces. 3. Do not operate the oven if it is damaged.
IMPORTANT SAFETY INSTRUCTIONS WARNING!--To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: 1. Read all instructions before using the appliance. 2. Read and follow the specific "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" on page 1. 3. This appliance must be grounded. Connect only to properly grounded outlet. See "GROUNDING INSTRUCTIONS" on page 4. 4.
11. Do not heat oil or fat for deep-frying. It is difficult to control the temperature of oil in microwave oven. 12. Do not cover or block any openings on the appliance. 13. Do not store or use this appliance outdoors. Do not use this product near water, for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations. 14. Do not operate this appliance if it has a damaged cord or a plug, if it is not working properly or if it has been damaged or dropped. 15.
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING!-- Improper use of the grounding plug can result in a risk of electric shock.
Specific stacking installation is as follows: a) Remove the 6 screws indicated in the figure below. b) Attach the mounting plate between the two machines and align the corresponding screw holes.
Cooking Utensils Guide This section lists which utensils can be used in this microwave, which have limited use for short periods, and which should not be used in this microwave. RECOMMENDED Microwave browning dish — Use to brown the exterior of small items such as steaks, chops, or pancakes. Follow the directions provided with your browning dish. Microwaveable plastic wrap — Use to retain steam. Leave a small opening for some steam to escape and avoid placing it directly on the food.
Specifications Power Consumption 208-240V/60Hz, 2800W(microwave) Output 1800W Operation Frequency 2450MHz 13 5/16 ×16 9/16 × 20 4/4 in. Outside Dimensions(H x W x D) Oven Capacity 0.6cu.ft. Net Weight Approx.40.1lbs Product Diagram 1. 2. 3. 4.
Control Panel DISPLAY Cooking time, power and indicators are displayed. Press to set power level. NUMBER PADS (0-9) Use to set time or select menu. PROG Use to store program, memory lock, lamp , etc. STOP Press once to temporarily stop cooking, or twice to cancel cooking altogether. It is also used to set child lock. X2 Use to double the cooking time. ENTER Use to determine your operation. START Press to start the cooking program.
Operation Instructions When the oven first plugged in, the display shows all for 2 seconds and "DE" beep will sound, then returns to standby mode and display "0". In the process of setting, the system will return to standby mode if there is not any operation within 20 seconds.
WEIGHT UNIT SETTING There are three kind of unit to be selected ("LB", "Kg" and "OZ"). 1. In standby mode, press ABC button repeatedly to select weight unit. 2. Use number buttons to set menu code. 3. Press ENTER button to confirm. 4. Press START button to start. NOTE: Each weight unit corresponds to 300 menus of the total menu, LB (001 to 300), Kg (301 to 600), OZ (601 to 900). After selecting the weight unit, you only need to input numbers (001 to 300).
Set lamp: 1. In standby mode, press and hold PROG button until the the display shows "PROG", " ", " " and " ". 2. Press and hold number button 2 more than 3 seconds, and repeatedly the operation to cycle select "LA1"and "LA2". Code Function LA1 Open the door, lamp is on. Close the door, lamp is off LA2 Open the door, lamp is off. Close the door, lamp is on NOTE: After setting up, press STOP button or no operation within 20 seconds, the system will return to standby mode and the display will show "0".
standby mode and the display will show "0". Restoring factory settings includes clearing the USB module menu data and restoring the memory settings to the factory settings. AUTO COOK The system has 900 auto cook menus to be selected. The default cooking power and time is "P10" and 15 minutes. You can also adjust the power and time by operating the control panel or downloading USB module (Directly input the cooking time and power of the corresponding menu in the specific file in the USB disk.
cooking time minutes - cooking time seconds. number (0-1000) First Section power (0-10) First Section min (0-99) First Section sec (0-99) Second Section power (0-10) Second Section min (0-99) Second Section sec (0-99) Third Section power (0-10) Third Section min (0-99) Third Section sec (0-99) #0001 #0002 #0003 #0004 #0005 #0006 ……… NOTE: The power ranges from P00 to P10, the cooking time ranges from 0 minute and 0 seconds to 99 minutes and 99 seconds.
SPLATTER SHIELD EXHAUST WINDOW FRAME CLEANING 1. 2. 3. Detaching: Hold the two tabs in front of the splatter shield with your hands (as shown by the arrows).Push the tabs following the direction of the arrows and pull downwards after you have pulled in the tabs. Wash the splatter shield exhaust window frame, rinse, sanitize, allow to dry. Installation: 1) Put the the exhaust window frame into the cavity.
Cleaning and Care 1. Turn off the oven and unplug the power cord from the wall when cleaning. 2. Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls, wipe with a damp cloth. Mild detergents may be used if the oven gets very dirty. Avoid using spray or other harsh cleaners. They may stain, streak or dull the door surface. 3. The outside of the oven should be cleaned with a damp cloth.
